-
×
UT 109 Automobile Multimeter
- Vendor:
Subtotal: ₨11,187
-4%
Visual Fault Locator
UT 691-10 Visual Fault Locator
| Specifications | |
| Model | UT691-10 |
| Laser output power | ≥10mW |
| Optical fiber length range | 8~10km |
| Wavelength of redight | 650±10nm |
| Optical fiber adapter | 2.5mm FC general connector |
| Battery type | 3.7V 1050mAh polymer lithium battery |
| Battery life | ＞7h |
| Battery status display | The battery status will be shown by 4 blue LED (not in flashlight) |
| Green indicator | Indicates auto power off state which LED will flash white light for 3 times |
| Laser mode | Continuous mode/Pulse mode |
| Charge voltage and current | DC 5V, < 1A |
| APO | 15min auto power off (manual adjustable) |
| Warning symbol | √ |
| Warning | √ |
| Key press test | ＞5000 times |
| Drop test | 1m |
| General Characteristics | |
| Power | 1050mAh rechargeable battery |
| Product color | Red and grey |
| Product net weight | 62g |
| Product size | 130mm x 38mm x 27mm |
| Standard individual packing | Gift box, English manual |
| Standard quantity per carton | 20pcs |
| Standard carton measurement | 285mm x 245mm x 155mm |
| Standard carton gross weight | About 2.8kg |
₨6,720 ₨7,000
UT691 visual fault locator is designed for optical fiber fault detection and locating, end to end optical fiber identification and more. It is IP54 rated, uses 650nm visible red light with 2emitting modes of continuous or pulse. With the functions of APO, battery status indicator and flashlight, it can be widely used in the fields of optical cable construction and maintenance, optical fiber communication or sensing, optical CATV and so on.
| Weight | 0.1 kg |
|---|---|
| Dimensions | 13 × 4 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 691-10 Visual Fault Locator”
-
Voltage Detector
UT07A-EU Socket Tester
Specifications Model UT07A-EU Operating voltage 230V Operating current ＜18mA Operating frequency 50Hz~60Hz Indications OK, leakage test passed OK Missing earth Missing live Missing neutral Live earth reverse Live earth reverse and missing earth General Characteristics Product color Red and grey Product net weight 79g Product size 65mm x 65mm x 61mm Standard individual packing Blister, English manual Standard quantity per carton 48pcs Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton) Standard carton gross weight 5.8kg SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a
There are no reviews yet.