UT691 visual fault locator is designed for optical fiber fault detection and locating, end to end optical fiber identification and more. It is IP54 rated, uses 650nm visible red light with 2emitting modes of continuous or pulse. With the functions of APO, battery status indicator and flashlight, it can be widely used in the fields of optical cable construction and maintenance, optical fiber communication or sensing, optical CATV and so on.
Visual Fault Locator
UT 691-10 Visual Fault Locator
Specifications | |
Model | UT691-10 |
Laser output power | ≥10mW |
Optical fiber length range | 8~10km |
Wavelength of redight | 650±10nm |
Optical fiber adapter | 2.5mm FC general connector |
Battery type | 3.7V 1050mAh polymer lithium battery |
Battery life | >7h |
Battery status display | The battery status will be shown by 4 blue LED (not in flashlight) |
Green indicator | Indicates auto power off state which LED will flash white light for 3 times |
Laser mode | Continuous mode/Pulse mode |
Charge voltage and current | DC 5V, < 1A |
APO | 15min auto power off (manual adjustable) |
Warning symbol | √ |
Warning | √ |
Key press test | >5000 times |
Drop test | 1m |
General Characteristics | |
Power | 1050mAh rechargeable battery |
Product color | Red and grey |
Product net weight | 62g |
Product size | 130mm x 38mm x 27mm |
Standard individual packing | Gift box, English manual |
Standard quantity per carton | 20pcs |
Standard carton measurement | 285mm x 245mm x 155mm |
Standard carton gross weight | About 2.8kg |
₨6,720 ₨7,000
Weight | 0.1 kg |
---|---|
Dimensions | 13 × 4 × 3 cm |
Based on 0 reviews
Be the first to review “UT 691-10 Visual Fault Locator”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
DC Power Supplies
UTP 3305C DC POWER SUPPLY
Specifications Model UTP3305C Output voltage 0~30V (CH1/CH2) Output current 0~5A (CH1/CH2) Output power 315W Load regulation Voltage <0.01%+5mV Current <0.1%+10mA Line regulation Voltage <0.01%+3mV Current <0.1%+3mA Resolution Voltage 10mV Current 1mA Accuracy (25℃±5℃) Voltage <0.5%+20mV Current <0.5%+10mA Ripple (20Hz~20MHz) Voltage ≤2mVrms Current ≤3mArms Output temperature
coefficientVoltage ≤150ppm Current ≤150ppm Voltage rise delay ≤100ms (10% rated load) Parallel/Series load regulation ≤0.1%+0.1V CH3 output features Voltage 5V Current 3A Voltage accuracy ±50mV Load regulation ±50mV Interfaces USB Device, RS-232 General Characteristics Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz Display 4 windows, LED Product net weight 9.1kg Product size 260mm x 176mm x 317mm Standard accessories USB and RS-232 interface cables, output cables Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 440mm x 388mm x 295mm Standard carton gross weight 10kg SKU: n/a -
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10%(max) 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10% Operating Environment 0~40℃ Relative humidity<80% Storage temperature -20~80℃ Relative humidity<80% Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃~480℃ 200℃~480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ (static) ±2℃ (static) Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a -
Laser Distance Meters
LM 570LD-I Laser Level Meter
Laser Type 1V1H Expanded Angle H110°/V110° Laser Class 2 Light Source 10 mW Laser Wavelength 510 nm H/V Accuracy ±3 mm/10 m Self-leveling Range 3°±1° Self-leveling Time 3 s Working Distance 20 m-40 m Operating Time >4 h Power AA battery (LR6) × 2 pcs. Operating Temperature from -10°C to +40°C Storage Temperature from -20°C to +70°C Dimensions 59 mm × 28 mm × 137 mm Weight 170 g SKU: n/a
There are no reviews yet.