● Cable construction and maintenance
Optical Multimeter
UT 693D Optical Multimeter (Power Meter & VFL)
Specifications | Description | UT693D | |
Optical power meter | Wavelength range | 800nm~1700nm | √ |
Calibrated wavelength | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm | ||
Measurement range | UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm | ||
Uncertainty | ±5% | ||
Display resolution | Linear: 0.1%, logarithmic: 0.01dBm | ||
Connector | FC/SC/ST | ||
Detector type | InGaAs | ||
Visual faultlocator | Wavelength | 650nm±10nm | √ |
Power | 10mW (measurable optical fiber length: approximately 8~10km) | ||
Mode | Continuous/Pulse | ||
Connector | FC/SC/ST | ||
Features | |||
Low battery indication | √ | ||
Auto power off | √ | ||
IP rating | IP65 | ||
Drop test | 2m | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 3 | ||
Display | 63mm x 40mm | ||
Product color | Red and grey | ||
Product net weight | 300g | ||
Product size | 189mm x 87mm x 45mm | ||
Standard accessories | Batteries, carrying bag | ||
Standard individual packing | Gift box, English manual | ||
Standard quantity per carton | 10pcs | ||
Standard carton measurement | 295mm x 250mm x 210mm | ||
Standard carton gross weight | 5.66kg |
₨12,600 ₨16,350
● Optical fiber communication
● Evaluation of optical equipment
● Production, installation, operation and maintenance of fiber optic transmission systems
● Optical engineering, production plant or facility maintenance
Weight | 0.3 kg |
---|---|
Dimensions | 19 × 9 × 4 cm |
Based on 0 reviews
Be the first to review “UT 693D Optical Multimeter (Power Meter & VFL)”
-
Laser Distance Meters
LM 50 Laser Distance Meter
Specifications LM50 Display type EBTN Display size 2.0-inches Range 50m Min. display unit 0.001m Measurement units m/ft/in Measurement basis front/rear Accuracy ±(2mm+5 x 10-5D) Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume √ Pythagoras √ Add/Subtract √ Data storage 20 groups Auto power off 3 minutes without operation Auto laser off 30s without operation Auto backlight off 10s without operation Audio indication √ Battery status display √ Storage temperature -20℃~70℃ Operating temperature 0℃~40℃ SKU: n/a -
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-IV Soldering Iron
1. Small size, light weight, easy to carry.
2. Using internal heating type heating element, heating up fast, high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron, safe and energy saving.
5. Equipped with lights, in the case of lacking of light, open the lights, so that welding is more desirable
and humane.
6. The internal using the SMT double-panel technology manufacturing, the process is neat, and the joint is
reliable
7. The handle shell with a new environmentally friendly materials, it is safe and durable.SKU: n/a
There are no reviews yet.