Multimeters
UT139S True RMS Digital Multimeter
Availability:
10 in stock
1. True RMS
2. NCV
3. Auto/manual ranges selectable
4. 31-segment analog bar graph
5. Diode, duty ratio and continuity buzzer
6. Black EBTN screen
₨13,800 ₨16,350
10 in stock
CompareUT139 series are CAT III 600V digital multimeters designed for electricians. Its NCV feature can effectively check electrical status through measuring EM field intensity. The new UT139E/S models include special features such as LoZ (ACV) for measuring‘ghost’ voltage. Its built-in 31-segment analog bar also gives electricians a better visual representation of measurement results.
UT139S is built with black EBTN display and it is a perfect meter for working in dark environments.
Weight | 0.3 kg |
---|---|
Dimensions | 17 × 8 × 5 cm |
Specifications | Range | UT139S | |||
DC voltage (V) | 600V | ±(0.5%+2) | |||
AC voltage (V) | 600V | ±(0.8%+3) | |||
DC current (A) | 10A | ±(0.7%+2) | |||
AC current (A) | 10A | ±(1%+3) | |||
Resistance (Ω) | 60MΩ | ±(0.8%+2) | |||
Capacitance (F) | 99.99mF | ±(4%+5) | |||
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) | |||
Temperature (°C) | -40°C~1000°C | ±(1%+4) | |||
Temperature (°F) | -40°F~1832°F | ±(1.5%+5) | |||
Features | |||||
Display count | 6000 | ||||
Auto range/Manual range/True RMS | √ | ||||
Bandwidth (Hz) | 45Hz~400Hz | ||||
NCV/Continuity buzzer | √ | ||||
Duty cycle | 0.1%~99.9% | √ | |||
Diode | Around 3V | ||||
LPF/LoZ (ACV) | √ | ||||
Analog bar | √ | ||||
General Characteristics | |||||
Power | 1.5V battery (R6) x 2 | ||||
Display | 58mm x 36mm | ||||
Product color | Red and grey | ||||
Product net weight | 345g | ||||
Product size | 170mm x 80mm x 48mm | ||||
Standard accessories | Batteries, test leads, temperature probe | ||||
. | |||||
Based on 0 reviews
Be the first to review “UT139S True RMS Digital Multimeter”
-
Clamp Meters
CMP-1006 Digital Clamp-on multimeter
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
SKU: n/a -
-
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a
There are no reviews yet.