UT171 series are industrial grade multimeters used by professionals. Its built-in square wave output is useful for troubleshooting industrial control signals. Its LoZ (ACV) feature can be used to identify residual (ghost) voltage in large capacitors. UT171C’s OLED display is perfect for working in low temperatures down to -30°C.
Multimeters
UT171C Industrial True RMS Digital Multimeter
Availability:
Out of stock
1. AC+DC measurement
2. Peak hold
3. Rechargeable battery
4. VFC low-pass filtering
5. USB/Bluetooth communication
₨69,000 ₨71,850
Out of stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 21 × 9 × 5 cm |
Specifications | Range | UT171C |
DC voltage (V) | 1000V | ±(0.025%+5) |
AC voltage (V) | 1000V | ±(0.4%+40) |
DC current (A) | 10A | ±(0.15%+2) |
AC current (A) | 10A | ±(0.75%+5) |
Resistance (Ω) | 60MΩ | ±(0.05%+2) |
Admittance (nS) | 60nS | ±(1%+10) |
Capacitance (F) | 60mF | ±(2.5%+40) |
Frequency (Hz) | 10Hz~10MHz | ±(0.01%+5) |
Temperature (°C) | -40°C~1000°C | ±(1%+30) |
Temperature (°F) | -40°F~1832°F | ±(1.5%+50) |
Features | ||
Display count | 60000 | |
Auto/Manual range | √ | |
Bandwidth (Hz) | 100kHz | √ |
4~20mA loop | 0~100% | √ |
LoZ (ACV) | Around 3kΩ | √ |
Diode | Around 3V | √ |
Continuity buzzer | √ | |
Duty cycle | 0.1%~99.9% | √ |
NCV/Data hold/MAX/MIN | √ | |
Relative mode | √ | |
Data storage | 9999 | |
Display type | OLED | |
Analog bar graph | 31 | |
LCD backlight | √ | |
Mis-plug alarm | √ | |
Low battery indication | √ | |
Auto power off | √ | |
Input protection | √ | |
Input impedance for DCV | √ | |
Input impedance for DCV | Around 1GΩ | √ |
General Characteristics | ||
Power | 7.4V 2000mAh Li-ion battery | |
Display | 70.6mm x 35.3mm | |
Product color | Red and grey | |
Product net weight | 384g | |
Product size | 206mm x 95mm x 55mm | |
Standard accessories | Batteries, test leads, point contact temperature probe,USB interface cable, power adaptor, PC software CD | |
Optional accessory | Bluetooth adaptor (UT-D07) |
Based on 0 reviews
Be the first to review “UT171C Industrial True RMS Digital Multimeter”
-
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
PHASE INDICATOR
PHASE INDICATOR KEW 8031
・Two Functions in One Unit
Presence of open phase can be checked by the lamps, and the phase
sequence can be indicated by the rotating disk.・ High Reliability
measuring range for 3-phase installations from 110V to 600V.
Sealed against dust ensures the trouble-free performance.・ Battery-free tester
SKU: n/a -
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
There are no reviews yet.