UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.
UT18C Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.
₨10,800 ₨13,000
Weight | 0.3 kg |
---|---|
Dimensions | 27 × 9 × 3 cm |
Specifications | Range | Best Accuracy |
Model | UT18C | |
LED AC/DC Voltage Indication (V) | 12V | 8V±2V |
24V | 18V±2V | |
50V | 38V±4V | |
120V | 92V±6V | |
230V | 174V±8V | |
400V | 320V±10V | |
690V | 550V±15V | |
Phase Rotation Test | Operating Voltage: 100V~690V | √ |
Frequency:50Hz~ 60Hz | ||
Single Lead(L2)Voltage Detection | Operating Voltage:100V~690V | √ |
Frequency: 50Hz~ 400Hz | ||
Continuity Test | Resistance: 0~100KΩ | √ |
Beeper and LED light Indicator | ||
RCD Test | Operating Voltage:230V(50Hz~400Hz) | √ |
Polarity Detection | Positive & Negative | √ |
Self-inspection | All LED or LCD indicator | √ |
No Power Test | Operating Voltage: 50VAC/120VDC~690VDC/AC | √ |
Features | ||
IP65 | √ | |
Auto Range | All Range | √ |
Exceed Voltage | Voltage Range:713V~788V | √ |
Auto standby | standby current <10uA | √ |
Silent mode | All Range | √ |
Work Light | All Range | √ |
Low Battery Indication | Voltage Range:2.2V~2.4V | √ |
LCD Display (Voltage+frequency) | 6V~ 690V (40Hz~400Hz) | ±(1.5%+5) |
General Characteristic | ||
Power | 1.5V Batteries(R03) × 2 | |
LCD Size | 31×20mm | |
Product Color | Red and Grey | |
Product Net Weight | 280g | |
Product Size | 272mm×85mm×31 mm | |
Standard Accessories | Batteries | |
Standard Individual Packing | Blister, English Manual | |
Standard Quantity Per Carton | 30PCs | |
Standard Carton Measurement | 440mm × 295mm × 455mm (0.079 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 17.5Kg |
Based on 0 reviews
Be the first to review “UT18C Voltage And Continuity Testers”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a
There are no reviews yet.