UT18D Voltage and Continuity Tester
10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
₨12,000 ₨13,000
10 in stock
Compare
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18D Voltage and Continuity Tester”
-
Voltage Detector
UT07A-EU Socket Tester
Specifications Model UT07A-EU Operating voltage 230V Operating current ＜18mA Operating frequency 50Hz~60Hz Indications OK, leakage test passed OK Missing earth Missing live Missing neutral Live earth reverse Live earth reverse and missing earth General Characteristics Product color Red and grey Product net weight 79g Product size 65mm x 65mm x 61mm Standard individual packing Blister, English manual Standard quantity per carton 48pcs Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton) Standard carton gross weight 5.8kg SKU: n/a -
-
-
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test ＜50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a -
Wire Tracker
UT 683KIT Wire Tracer
Description Certificates CE, RoHS Transmitter Port flashing √ Wire tracking √ Line alignment √ Open-short test 10kΩ Polarity test √ Operating time ＞8 hours Receiver Wire tracking RJ11＞3000m; RJ45＞100m NCV function √ Headset jack 3.5mm Low battery indication √ Operating time ＞5 hours GENERAL CHARACTERISTICS Power 1050mAh rechargeable lithium battery Product net weight Transmitter: around 95g; Receiver: around 127g Product size Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual Standard individual packing Gift box, carrying bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 325mm Standard carton gross weight About 10kg SKU: n/a
Related products
-
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a -
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a
There are no reviews yet.