-8%

UT18D Voltage and Continuity Tester

Availability:

10 in stock


1. Auto power off, the conductor to be measured is greater than 12V

2. Phase rotation test
3. Continuity test with buzzer and LED indication
4. Low battery indication and over voltage prompt
5. Flashlight
6. Test live voltage without batteries
7. Buzzer and silent modes available
8. Auto range
9. Polarity indication

12,000 13,000

10 in stock

Compare
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
Weight 0.3 kg
Dimensions 27 × 8 × 3 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT18D Voltage and Continuity Tester”

There are no reviews yet.

  • UT 109 Automobile Multimeter

    0 out of 5
    (0)

    1. Diode/Data hold                                                                                                                                                                          2. Continuity buzzer                                                                                                                                                                        3. Low battery indication                                                                                                                                                                4. Input protection

    SKU: n/a
  • UT07A-EU Socket Tester

    0 out of 5
    (0)
    Specifications
    Model UT07A-EU
    Operating voltage 230V
    Operating current <18mA
    Operating frequency 50Hz~60Hz
    Indications OK, leakage test passed
    OK
    Missing earth
    Missing live
    Missing neutral
    Live earth reverse
    Live earth reverse and missing earth
    General Characteristics
    Product color Red and grey
    Product net weight 79g
    Product size 65mm x 65mm x 61mm
    Standard individual packing Blister, English manual
    Standard quantity per carton 48pcs
    Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton)
    Standard carton gross weight 5.8kg
    SKU: n/a
  • YH 929D-II SOLDERING IRON

    0 out of 5
    (0)

    Model:929D-II

    Voltage:220V~240V/AC,50Hz

    Maximum power:130W

    Rated power:18W

    Temperature range:90~480°C/194~896°F

    SKU: n/a
  • YH 1502D+ USB DC POWER SUPPLY

    0 out of 5
    (0)
    The power supply input can make 110V,220V,230V,240V AC
    The biggest power 30W max
    Output voltage 0-15V DC
    Work temperature -10°C-40°C
    Empty carry to exhaust <0.25w
    SKU: n/a
  • UPO 2104E Ultra Phosphor Oscilloscope

    0 out of 5
    (0)
    Specifications
    Model UPO2104E
    Bandwidth 100MHz
    Channels 4
    Sampling rate 1GS/s
    Memory depth 56Mpts (single channel)
    Waveform capture rate 83,000wfms/s
    Time base scale (s/div) 5ns/div~50s/div
    Input impedance (1MΩ±2%) II (20pF±3pF)
    Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
    Waveform record 65,000 Frames
    Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code
    Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced
    Auto measurements  Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A  (Rising edge), Delay B->A (Falling edge).
    Number of measurements Display 5 measurements at the same time
    Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements
    Frequency counter Hardware 6 bits counter (Channels are selectable)
    Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail)
    General Characteristics
    Power 100V~240VAC, 50Hz/60Hz
    Display 8 inches TFT color LCD Display with WVGA (800×480) resolution
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm×164mm×108mm
    Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable
    Standard individual packing Carton box
    Standard quantity per carton 2pcs
    Standard carton measurement 450mm×420mm×280mm
    Standard carton gross weight 9.7kg
    SKU: n/a
  • UTG962E Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    Specifications
    Model UTG962E
    Channel 2
    Max frequency 60MHz
    Sampling rate 200MS/s
    Vertical resolution 14 bits
    Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary
    Sweep modes Logarithmic, linear
    Frequency Characteristics
    Sine 1μHz~60MHz
    Square 1μHz~20MHz
    Ramp 1μHz~400kHz
    Pulse 1μHz~20MHz
    Arbitrary 1μHz~10MHz
    Resolution 1μHz
    Accuracy Within 90 days ± 50ppm
    Within 1 year ± 100ppm
    18℃~28℃
    Output Characteristics
    Impedance 50Ω/High Z
    Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z)
    DC offset range (AC+DC) ±5V (50Ω); ±10V  (high Z)
    Amplitude resolution 1mV
    General Characterisitics
    Power 100~240VAC, 50Hz/60Hz
    Display 4.3”TFT LCD (480×272)
    Product color White and grey
    Product net weight 0.33kg
    Product size 172mm x 90mm x 68mm
    Standard accessories USB interface cable, power cord, BNC cable with alligator clips
    Standard individual packing Carton box
    Standard quantity per carton 4pcs
    Standard carton measurement 435mm x 360mm x 125mm
    Standard carton gross weight 3.8kg
    SKU: n/a