-
×
YH 853D 5A-II REWORK STATION ALL IN 1
- Vendor:
superworld
Subtotal: ₨65,400
-8%
Multimeters
UT195DS Professional Digital Multimeters
Availability:
9 in stock
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
₨40,000 ₨43,600
9 in stock
Compare1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
| Weight | 0.5 kg |
|---|---|
| Dimensions | 19 × 9 × 6 cm |
| Specifications | Range | Best Accuracy |
| Model | UT195DS | |
| DC voltage | 600mV ~ 1000V | ±(0.5%+3) |
| AC+DC | 6.000V ~ 600V | ±(1.5%+4) |
| AC voltage | 600mV ~ 750V | ±(0.7%+3) |
| LoZ ACV | 600.0V | ±(2.0%+3) |
| DC current (A) | 600.0μA ~ 20A | ±(0.8%+3) |
| AC current (A) | 600.0μA ~ 20A | ±(1.0%+3) |
| Resistance (Ω) | 600.0Ω ~ 60.00MΩ | ±(0.8%+2) |
| Capacitance | 6.000nF ~ 60.00mF | ±(3%+5) |
| Frequency | 60.00Hz ~ 40.00MHz | ±(0.1%+4) |
| Duty ratio | 0.1% ~ 99.9% | ±(2.0%+5) |
| Peak hold | 250μs |  |
| Features | ||
| Display count | 6000 | |
| Display interface (HTN) | Dual display | |
| Measurement of digital conversion rate | times/s | 5 |
| Measurement of analogue bar conversion rate | times/s | 20 |
| Analogue bar | 31 section | √ |
| True RMS | √ | |
| AC voltage frequency response | 45 ~5kHz | |
| AC current frequency response | 45 ~5kHz | |
| Low pass filter test | √ (1kHz 3dB attenuation) | |
| Diode/Continuity test | 3V | |
| Auto/Manual range | √ | |
| Auto power off | √ | |
| Continuity buzzer | √ | |
| Low battery indication | √ | |
| Data hold | √ | |
| MAX/MIN | √ | |
| Function selection | √ | |
| Flashlight | √ | |
| Auto backlight | √ | |
| Working temperature | 0 °C ~40 °C | |
| 2m drop proof | √ | |
| Protection rating | IP65 | |
| General Characteristics | ||
| Power supply | 9V 6F22 carbon-zinc or 6LR61 alkaline battery | |
| LCD size | 66mm × 51mm | |
| Device color | Red and grey | |
| Device weight | 473g | |
| Device size | 195mm × 95mm × 58mm | |
| Standard accessories | Testing probes, battery, carrying bag | |
| Standard individual packing | Gift box, user manual | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT195DS Professional Digital Multimeters”
-
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
-
-
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Trac-Lok mode to conserve battery life on insulation and continuity tests.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• Backlight function to view the test results in dimly lit areas.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a
Related products
-
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a
There are no reviews yet.