UT195DS Professional Digital Multimeters
9 in stock
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
₨40,000 ₨43,600
9 in stock
Compare1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
| Weight | 0.5 kg |
|---|---|
| Dimensions | 19 × 9 × 6 cm |
| Specifications | Range | Best Accuracy |
| Model | UT195DS | |
| DC voltage | 600mV ~ 1000V | ±(0.5%+3) |
| AC+DC | 6.000V ~ 600V | ±(1.5%+4) |
| AC voltage | 600mV ~ 750V | ±(0.7%+3) |
| LoZ ACV | 600.0V | ±(2.0%+3) |
| DC current (A) | 600.0μA ~ 20A | ±(0.8%+3) |
| AC current (A) | 600.0μA ~ 20A | ±(1.0%+3) |
| Resistance (Ω) | 600.0Ω ~ 60.00MΩ | ±(0.8%+2) |
| Capacitance | 6.000nF ~ 60.00mF | ±(3%+5) |
| Frequency | 60.00Hz ~ 40.00MHz | ±(0.1%+4) |
| Duty ratio | 0.1% ~ 99.9% | ±(2.0%+5) |
| Peak hold | 250μs |  |
| Features | ||
| Display count | 6000 | |
| Display interface (HTN) | Dual display | |
| Measurement of digital conversion rate | times/s | 5 |
| Measurement of analogue bar conversion rate | times/s | 20 |
| Analogue bar | 31 section | √ |
| True RMS | √ | |
| AC voltage frequency response | 45 ~5kHz | |
| AC current frequency response | 45 ~5kHz | |
| Low pass filter test | √ (1kHz 3dB attenuation) | |
| Diode/Continuity test | 3V | |
| Auto/Manual range | √ | |
| Auto power off | √ | |
| Continuity buzzer | √ | |
| Low battery indication | √ | |
| Data hold | √ | |
| MAX/MIN | √ | |
| Function selection | √ | |
| Flashlight | √ | |
| Auto backlight | √ | |
| Working temperature | 0 °C ~40 °C | |
| 2m drop proof | √ | |
| Protection rating | IP65 | |
| General Characteristics | ||
| Power supply | 9V 6F22 carbon-zinc or 6LR61 alkaline battery | |
| LCD size | 66mm × 51mm | |
| Device color | Red and grey | |
| Device weight | 473g | |
| Device size | 195mm × 95mm × 58mm | |
| Standard accessories | Testing probes, battery, carrying bag | |
| Standard individual packing | Gift box, user manual | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT195DS Professional Digital Multimeters”
-
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
-
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
Tool Kits
JM-Y02 Precision Electronic Screwdriver Set For Maintenance
Application:
Cell phone/Tablet/Camera/Laptop/Glasses
Feature:
Brand: JAKEMY
Model: JM-Y02
Name: Electric screwdriver set
Torsion: 0.1-2.5kgf.cm
Speed: 395 r/min
MAH: 800 mA
Rated output voltage: 3.7 V
Duration: 3 H
Product material: Aluminum alloy Shell, Anodized surfaceUsage:
Phillip 1.5: for Samsung, MI
Slotted 2.0: for iPhone
Torx T2: for Huawei, OPPO and VIVO
Pentalober(Star): for iPhone
Mainboard Phillips, Tri-wing:0.8: for new iphone 7 and above modelsSKU: n/a
Related products
-
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a -
There are no reviews yet.