-5%

UT195E Professional Digital Multimeters


Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. 20A current measurement (max 30 seconds)

9. 31 analogue bar

27,500 29,025

Compare

Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. 20A current measurement (max 30 seconds)

9. 31 analogue bar

Category:
Weight 0.5 kg
Dimensions 21 × 10 × 6 cm
Specifications Range Best Accuracy
Model UT195E
DC voltage 600mV ~ 1000V ±(0.5%+3)
AC voltage 600mV ~ 750V ±(0.7%+3)
LoZ ACV 600.0V ±(2.0%+3)
DC current (A) 600.0μA ~ 20A ±(0.8%+3)
AC current (A) 600.0μA ~ 20A ±(1.0%+3)
Resistance (Ω) 600.0Ω ~ 60.00MΩ ±(0.8%+2)
Capacitance 6.000nF ~ 60.00mF ±(3%+5)
Frequency 60.00Hz ~ 10.00MHz ±(0.1%+4)
Duty ratio 0.1% ~ 99.9% ±(2.0%+5)
Features
Display count 6000
Display interface (HTN) Single display
Measurement of digital conversion rate times/s 3
Measurement of analogue bar conversion rate times/s 10
Analogue bar 31 section
True RMS
AC voltage frequency response 45 ~ 400Hz
AC current frequency response 45 ~ 400Hz
Low pass filter test √ (1kHz 3dB attenuation)
Diode/Continuity test 3.5V
Auto/Manual range
Auto power off
Continuity buzzer
Low battery indication
Data hold
MAX/MIN
Functional selection
Electrical torch
Auto backlight
Working temperature 0 °C ~40 °C
2m drop proof
Protection grade IP65
General Characteristics
Power supply 9V 6F22 carbon-zinc or 6LR61 alkaline battery
LCD size 66mm × 51mm
Device color Red and grey
Device weight 473g
Device size 195mm × 95mm × 58mm
Standard accessories Testing probes, battery, carrying bag
Standard individual packing Gift box, user manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT195E Professional Digital Multimeters”

There are no reviews yet.

  • UPO2102CS Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 2/;
    3、Bandwidth 100MHz,;
    4、Memory Depth 32Mpts(Standard);
    5、Waveform Capture Rate up to 30,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UT21P02CSO
  • MIC-5001, 5000V Insulation Tester

    0 out of 5
    (0)

    Insulation resistance measurement in a compact, light-weight, low-cost design.

    • Measurement to 5 TΩ
    • Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
    • Continuous indication of insulation resistance or leakage current
    • Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
    • Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
    • Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
    • Continuous display of test voltage during the measurement
    • Protection against measuring live objects
    • Two and three-lead measurement method
    • Ramp Test Insulation resistance measurement
    • Measurement of breakdown voltage with increments up to 1 kV / s
    • Measurement of alternating and direct voltages from 0 V to 750 V
    • 990 cells of memory (11880 records) to record results
    • Data transfer to PC via USB cable
    • Built-in rechargeable battery pack
    • Meets the requirements of the EN 61557 standard
    • Charge from optional car lighter (12 V) socket accessory
    SKU: n/a
  • MIC-10 , 1000 V Insulation Tester

    0 out of 5
    (0)

    Insulation Resistance Meter

    SKU: n/a
  • AC DIGITAL CLAMP METER KEW 2117R

    0 out of 5
    (0)

    AC DIGITAL CLAMP METER KEW 2117R

    • Fully Safety jaw
    • Ergonomic over-molded body gives convenient one-hand operation
    • Large easy-to-read display with 0.01A resolution
    • Accurate reading with True RMS
    60/600/1000A auto-ranging
    • Long battery life
    • Safety Standard
    IEC 61010-1 CAT IV 300V / CAT III 600V

    SKU: n/a
  • PQM-707 Power Quality Analyzer

    0 out of 5
    (0)
    • Features:

      • 7″ touch screen – intuitive operating
      • CAT IV 600V – high safety
      • all parameters acc. to class S – high accuracy of measurements
      • Li-Ion rechargeable battery – higher mobility
      • removable memory card – recording data with no restrictions

      Possible measurements:

      • Measurements according to EN 50160,
      • Voltage L1, L2, L3, N-PE (five inputs),
        – average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
      • Current L1, L2, L3, N (four inputs),
        – average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
      • Crest factor for voltage and current,
      • Frequency from 40 Hz to 70 Hz ,
      • Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
      • Power recording:
        • Budeanu method,
        • IEEE 1459,
      • Active, reactive, apparent energy,
      • Power factor, cosφ, tgφ,
      • Up to 50th harmonics for voltage and current,
      • Total Harmonic Distortion (THD) for voltage and current,
      • Short-term (PST) and long-term (PLT) flicker,
      • Unbalance of voltage and current,
      • Current and voltage events registration including waveforms and RMS graphs half period,
      • Inrush current
      • Calculator of energy tariffs
      • ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
    SKU: n/a
  • KT-80 Thermal Imager

    0 out of 5
    (0)

    Features and benefits of  Sonel KT:

    • Friendly UI, easy to use without training,
    • Affordable as entry level diagnostic tool,
    • Removable large capacity Li-ion battery,
    • 4 hour working time,
    • 3,5’’ large screen with no image cropping, high brightness screen to show image with no detailed information lost even outdoor or in highlight,
    • Rugged and compact design, metal internal structure,
    • Standard Micro USB interface for data transmission and charging,
    • Wi-Fi connection (Optional).
    SKU: n/a