UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
9 in stock
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
₨38,400 ₨40,240
9 in stock
Compare- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 24 × 8 × 5 cm |
SPECIFICATION
Safety Rating: CAT IV 600V
Display Count: 6000
DC Voltage (V): 600.0V
AC Voltage: 600.0V
LoZ ACV: 600.0V
DC Current (A): 600.0A
AC Current (A): 600.0A
Resistance (Ω): 60.00MΩ
Capacitance (F): 60.00mF
DC Current: 2000uA
AC Current: 2000uA
Frequency (Hz): 40.00MHz
Diode Test/Continuity Buzzer
Duty Cycle
Temperature (°C/°F)
Motor Test: three phase rotation test can identify the phases of the power supply
LPF (1kHz 3dB decay)
Inrush Current
AC+DC Voltage (V)
Dual-Display (Voltage+Current)
Backlight
Integrated Protection Level: IP54
Application: HVAC/R Motor
Power supply: AAA 1.5V alkaline battery × 3
Product Dimensions : (L x W x H)
8cm x 4.5cm x 23cm
Product Weight: 0.31 kg
Brand
UNI T
Based on 0 reviews
Be the first to review “UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test”
-
Clamp Meters
CMP-2000 Digital clamp-on multimeter
It provides:
- AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
- Measurement of INRUSH current in start-up phase of electrical device.
- AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
- Resistance measurement and continuity test:
– continuity test with acoustic signalling (beeper) for resistance below 30 Ω. - Capacitance measurement.
- Temperature measurement (Fahrenheit or Celsius).
- Frequency measurement.
- Duty cycle measurement.
- Diode test.
SKU: n/a -
Multimeters
CMM-11 Multimeter
- manual and automatic range selection
- HOLD function for holding measured values
- MAX/MIN” function for displaying extreme values
- compact housing – allows to store the device in a pocket
- increased resistance to falls from heights above 2 m thanks to the elastomer coating
- built-in Bluetooth module for data transfer to mobile devices
- built-in flashlight for lighting the measuring places
- Beeper for sound signal circuit continuity
- Auto-OFF function for automatic switching off of the unused device
- display 3¾ digit (count max 4000)
SKU: n/a -
Insulation Tester
MIC-2501,2500V Insulation Resistance Meter
Electrical safety:
- type of insulation: double, in acc. with EN 61010-1 und IEC 61557
- measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
- case protection rating in acc. with EN 60529: IP65
Other technical specifications:
- power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
- weight of the meter: approx. 0,9 kg
- dimensions: 200 x 180 x 77 mm
- display: LCD segment display
- measurement results memory: 990 cells, 11880 records,
- transmission of measurement results: USB
SKU: n/a -
Clamp Meters
CLAMP METER AC BM 528F
Product DescriptionBM528F AC Digital Clamp meter Technical parametersFunctionsRangeAccuracy(BM528F)DC Voltage200mV/2V/20V/200V/1000V±（0.8%+2）AC Voltage2V/20V/200V/700V±（1.2%+5）AC Current2A/20A/200A/600A±（2%+10）Ω Resistance200/2K/20K/200K/2M/20MΩ±（1%+3）Capacitance20n/200n/2μ/20μ/200μ/2mF±（3%+5）Frequency200/2K/20K/200K/2M/20MHz±（0.5%+3）℃ / ℉-50℃ ~1000℃-58℉~1832℉
±（1%+5）±（1.2%+6）SKU: n/a
Related products
-
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
There are no reviews yet.