UT240 series is a stable, safe and reliable handheld power and harmonics clamp meter, which combines with digital ammeter, power measurement, harmonic measurement and equipped with a powerful measurement and data processing software. It is suitable for testing, calculating and displaying voltage, current, active power, power factor, phase angle, apparent power, reactive power, harmonic, electrical energy and frequency etc. Its harmonic measurement can be measured up to 20 times.
Clamp Meters
UT243 Power and Harmonics Clamp Meters
UT240 series is a stable, safe and reliable handheld power and harmonics clamp meter, which combines with digital ammeter, power measurement, harmonic measurement and equipped with a powerful measurement and data processing software. It is suitable for testing, calculating and displaying voltage, current, active power, power factor, phase angle, apparent power, reactive power, harmonic, electrical energy and frequency etc. Its harmonic measurement can be measured up to 20 times.
₨64,800 ₨66,136
Weight | 0.6 kg |
---|---|
Dimensions | 30 × 11 × 4 cm |
Specifications | Range | Best Accuracy |
Model | UT243 | |
AC Current (A) | 50A/250A/1000A | ±(2%+5) |
AC Voltage (V) | 150V/300V/600V | ±(1.2%+5) |
Frequency (Hz) | 50Hz~60Hz | √ |
Active Power (W) | 0.01KW~600KW | ±(3%+5) |
Apparent Power (VA) | 0.01KVAr~600KVAr | ±(4%+5) |
Reactive Power (VAr) | 0.01KVA~600KVA | ±(3%+5) |
Power Factor | 0.3~1 | ±(1%+2) |
Phase Angle (°) | 0° ~ 360° | ±1° |
Active Energy (Wh) | 1~9999KWh | ±(3%+5) |
Features | ||
Display Count | 10000 | |
Auto Range | √ | |
Jaw Capacity | 50mm | |
True RMS | √ | |
Auto Power Off | √ | |
Low Battery Indication | √ | |
Data Hold | √ | |
MAX/MIN | √ | |
Data Logging | 999 | |
USB Interface | √ | |
LCD Backlight | √ | |
Full Icon Display | √ | |
Single-Phrase 2-Wires | √ | |
3-Phrase 3-Wires | √ | |
3-Phrase 4-Wires | √ | |
Phase Sequence Test | √ | |
Harmonic Analysis | 1~20 | |
Setup | √ | |
Input Protection | √ | |
Input Impedance for DCV | Around 5MΩ | √ |
General Characteristic | ||
Power | 1.5V Batteries(LR6)×4 | |
LCD Size | 46mm X 42mm | |
Product Colour | Red and Grey | |
Product Net Weight | 601g | |
Product Size | 303mm X 112mm X 39mm | |
Standard Accessories | Test Lead, Batteries, Alligator Clips, USB Interface Cable, Tool Box, PC Software CD | |
Standard Individual Packing | Gift Box, English Manual | |
Based on 0 reviews
Be the first to review “UT243 Power and Harmonics Clamp Meters”
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
-
Clamp Meters
CMP-1006 Digital Clamp-on multimeter
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
SKU: n/a
There are no reviews yet.