UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
UT275 Clamp Earth Ground Testers
Out of stock
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
₨94,800 ₨96,000
Out of stock
CompareWeight | 1.3 kg |
---|---|
Dimensions | 29 × 9 × 7 cm |
Specifications | Range | Best Accuracy |
Model | UT275 | |
Earth Ground Resistance (Ω) | 0.01~0.099Ω | ±(1%+0.01) |
0.1~0.99Ω | ±(1%+0.01) | |
1.0~49.9Ω | ±(1.5%+0.1) | |
50.0~99.5Ω | ±(2%+0.5) | |
100~199Ω | ±(3%+1) | |
200~395Ω | ±(10%+5) | |
400~590Ω | ±(20%+10) | |
600~1000Ω | ±(25%+20) | |
Leakage Current(A) | 0.00~299mA | ±(2.5%+2mA) |
0.30~2.99A | ±(2.5%+100mA) | |
3.00~30.0A | ±(2.5%+300mA) | |
Features | ||
Display Count | 9999 | |
Auto Range | √ | |
Jaw Capacity | 28mm | |
Auto Power Off | √ | |
Low Battery Indication | ≤5.2V | √ |
Data Hold | √ | |
Data Logging | 30 | |
Data Recall | √ | |
LCD Backlight | √ | |
Auto Calibration | √ | |
Resistance Limit Alarm | √ | |
General Characteristic | ||
Power | 1.5V Alkaline Batteries(LR6)×4 | |
LCD Size | 47mm X 28.5 mm | |
Product Color | Red and Grey | |
Product Net Weight | 1320g | |
Product Size | 293mm X 90mm X66 mm | |
Standard Accessories | Batteries, Test Ring, Tool Box | |
Standard Individual Packing | Gift Box, English Manual | |
Standard Quantity Per Carton | 5 PCs | |
Standard Carton Measurement | 495mm X 368mm X 310mm (0.057CBM Per Standard Carton) | |
Standard Carton Gross Weight | 16Kg |
Based on 0 reviews
Be the first to review “UT275 Clamp Earth Ground Testers”
-
Environment Meters
UT362 Anemometer
1. Data hold, LCD backlight
2. ℃/℉ selectable3. Auto power off (cancelable)4. 2044 sets data storage5. Auto record function with 0 .5~255s interval6. Wearproof fan shaft for improved accuracy and reliability7. Wind speed modes: MAX, MIN, Real-time8. Wind count modes: MAX, 2/3 MAX, MIN, AVG, real-time9. 7 selectable units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMMSKU: n/a -
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Earth Ground Resistance Testers
UT278A Clamp Earth Ground Testers
UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
.SKU: n/a -
Clamp Meters
CMP-1006 Digital Clamp-on multimeter
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
SKU: n/a
There are no reviews yet.