1. EBTN screen, 20 sets of data storage (UT309D)
IR Thermo Meters
UT309D Professional IR Thermometer
Availability:
Out of stock
1. EBTN screen, 20 sets of data storage (UT309D)
₨13,080 ₨17,454
Out of stock
Compare2. Color EBTN screen, 20:1 D:S ratio, 99 sets of data storage, time scheduled measurement (UT309E)
Weight | 0.3 kg |
---|---|
Dimensions | 19 × 12 × 5 cm |
Specifications | UT309D |
Temperature range | -35℃~650℃ |
-31℉~ 1202℉ | |
Accuracy | ≥0℃: ±1.8℃ or ±1.8% |
<0℃: ±(1.8℃+0.1℃/℃) | |
≥32℉: ±3.6℉ or ±1.8% | |
<32℉: ±(3.6℉+0.1℉/℉) | |
D:S ratio | 12:01 |
Response time | <250ms |
Emissivity | 0.1~1.0 (adjustable) |
Spectral response | 8um~14um |
Laser power | < 1mW |
Features | |
Auto power off | √ |
Low battery indication | √ |
LCD display | EBTN |
High/low LED alarm | √ |
Data hold | √ |
℃/℉ selection | √ |
MAX/MIN/AVG/DIFF mode | √ |
Lock measurement | √ |
Dual lasers | √ |
Data storage with date and time | 20 |
Scheduled measurement | – |
Monitoring measurement | – |
Protective function | – |
Operating temperature | 0℃~50℃ (32℉~122℉) |
Storage temperature | -20℃~60℃ (-4℉~140℉) |
Operating humidity | <90%RH (non-condensing) |
Drop test | 3m |
IP rating | IP65 |
General Characterisitics | |
Power | 9V battery |
Display | 32mm x 32mm |
Product color | Red and grey |
Product net weight | 292g |
Product size | 189mm x 118mm x 55mm |
Standard accessories | Battery, carrying bag |
Standard individual packing | Gift box, blister, English manual |
Standard quantity per carton | 10pcs |
Standard carton measurement | 475mm x 335mm x 325mm |
Standard carton gross weight | 5.8kg |
Based on 0 reviews
Be the first to review “UT309D Professional IR Thermometer”
-
Multimeters
UT195DS Professional Digital Multimeters
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
SKU: n/a -
-
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Thermal Imagers
UNI-T UTi712S Economical Handheld Infrared Thermal Imaging Camera with Buzzer Alarm Temperature Range -20ºC~400ºC
Thermal ImagersUNI-T UTi712S Economical Handheld Infrared Thermal Imaging Camera with Buzzer Alarm Temperature Range -20ºC~400ºC
Product Features of UTi712S Thermal Imager
- 2.8″ LCD screen
- Infrared resolution: 120 x 90
- Temperature measurement range: -20ºC~400ºC
- Temperature Compensation
- Photograph function with SD card storage
- PC analysis software
- Buzzer/Flashlight alarm
- Auto capture of High/Low temperature
- With Laser Indicator
- Flashlight
- 1/4″ tripod mounting hole
- IP54/2m drop proof
SKU: n/a
There are no reviews yet.