UT312 Vibration Tester
UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation.
10 in stock
1. Highly accurate and precise
₨85,000 ₨97,000
10 in stock
CompareUT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation.
Weight | 0.2 kg |
---|---|
Dimensions | 18 × 7 × 3 cm |
Specifications | Range | UT312 |
Acceleration (O-P) | 0.1~199.9m/s² | Frequency response: 10~1500Hz, Amplitude error: ≤±5% |
Amplitude linear error: ≤2.0m/s², ≤±10%; >2.0m/s², ≤±5% | ||
Velocity (RMS) | 0.1~199.9mm/s | Frequency response: 10~1500Hz, Amplitude error: ≤±5% |
Amplitude linear error: ≤2.0m/s, ≤±10%; >2.0m/s, ≤±5% | ||
Displacement (P-P) | 1~1999μm | Frequency response: 10~500Hz, Amplitude error: ≤±5% |
Amplitude linear error: ≤20um, ≤±10%; >20um, ≤±5% | ||
Features | ||
Data hold | √(auto data hold when releasing the measure key) | |
Low battery indication | √ | |
Auto power off | √(auto power off 1 minute after releasing the measure key) | |
Battery life | Continuous measuring time > 20 hours | |
Display count | 2000 | |
General Characterisitics | ||
Power | 9V battery (6F22 ) | |
Product color | Red and grey | |
Product net weight | 230g (including battery) | |
Product size | 185mm x 68mm x 30mm | |
Standard accessories | Battery, tool box | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 5pcs | |
Standard carton measurement | 375mm x 307mm x 246mm | |
Standard carton gross weight | 5.8kg |
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30Ω
SPECIFICATIONS:
– Maximum display: 1999
– Method indication: LCD
– Maximum arm span: 60mm
– Operating temperature range:
work: 0C – 40C
Storage:-10C – 60C
– Power supply: 9V battery
– Low battery indication: YES, graphic symbol
– Audible indication: YES, piezoelectric transducer
– Dimensions: 270x100x45 mm
– Weight: about 610g (with battery)
Features
– Measuring voltage: 0-1000V 2 range
– Measurement of AC voltage: 0-700V in 1 range
– Measurement of alternating current: 200A-2000A in 2 ranges
– Measuring current: 200A-2000A in 2 ranges
– Measurement of resistance: 2k in 1 range
– Measuring capacity: NO
– Frequency: NO
– Temperature measurement: NO
– Testing LEDs: YES
– Acoustic continuity tester: YES
– Distance between arms: 6cm
– Meter dimensions: 270x100x45 mm
– Weight: 610g with battery
– Basic accuracy: ± (0.5% +2 digits)
1 × Clamp-On Meter BM-2000B
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
There are no reviews yet.