-
×
YH 907K IRON FOR 939D+
- Vendor:
superworld
Subtotal: ₨2,976
-17%
Moisture Testers
UT377A Wood Moisture Meter
Availability:
17 in stock
UT377A is a digital meter designed to measure the moisture content of wood, paper, plywood, and other wooden materials. This device classifies wood into four categories based on material density, and applies temperature compensation algorithm to ensure measurement accuracy. UT377A’s miniature design, low power consumption, and high precision all make this a great product choice for measuring wood moisture content.
₨5,400 ₨6,500
17 in stock
CompareMain features
1. 4 types of wood categories (28 tree species reference)
2. Auto ambient temperature compensation function for reducing measurement errors
3. Clear LCD display with 2/s refresh rate
4. Max/Min modes; data hold
5. Low battery indication; LCD backlight
6. Auto/Manual power off
| Weight | 0.1 kg |
|---|---|
| Dimensions | 13 × 5 × 3 cm |
| Specifications | Range | Resolution Ratio | Error |
| Measurement of wood moisture content (%) | 2～40% | 0.0 | ±2% |
| Probe insertion test (count) | 1000 | – | – |
| Ambient temperature correction range (℃) | -10～60℃ | – | – |
| Features | |||
| Display digit | 3 bits | ||
| Display interface (HTN) | Single display | ||
| Refresh rate | 2 times/s | ||
| Auto range | √ | ||
| Auto power off | √ | ||
| Low battery indication | √ | ||
| Data hold | √ | ||
| Max/Min | √ | ||
| Species selection | √ | ||
| Backlight | √ | ||
| Working temperature | 0℃～40℃ | ||
| 1m drop test | √ | ||
| General Characteristics | |||
| Power | 1.5V AAA carbon zinc battery or AAA alkaline battery X 3 | ||
| LCD size | 35X32mm | ||
| Product color | Red and grey | ||
| Product net weight | about 130g | ||
| Product size | 135X53X28mm | ||
| Standard individual packing | Gift box, bubble bag, manual | ||
Brand
UNI T
Based on 0 reviews
Be the first to review “UT377A Wood Moisture Meter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT201+ ACA Digital Clamp Meters
1. Auto range and 3/s sampling rate
2. Data hold
3. Max value hold
4. Auto power off
5. Low battery prompt, over-range prompt and auto polarity display
6. Comfortable tohold and easy to carry with (Product weight: 220g)
7. 1m drop proof
8. Complies with Double Insulationand Over Voltage standards of CAT II 600V, CAT III 300V and Pollution Degree 2
9. Complies with CE (European Union) directives
SKU: n/a -
Oscilloscopes
UTD1102C Handheld Digital Storage Oscilloscopes
1、Automatic waveform and status configuration；
2、Storage of waveforms, setups and interfaces; waveforms and setups reproduction
3、Screen copy function；
4、Fine window extension; precise analysis of waveform details and overview；
5、Unique waveform recording, storage and replay function；
6、HD color 5.7 inch LCD panel at 320 x 240 pixel aspect ratio；
7、Multiple waveform mathematics functions (including add, subtract, multiply and divide)；
8、Multimeter function；
9、USB drive system software upgrade.SKU: n/a
Related products
-
Moisture Testers
MS6900S Moisture Tester
Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick
SKU: n/a
There are no reviews yet.