UT501A Insulation Resistance Tester
5 in stock
1. 2000 count LCD display, overload indication, backlight
₨15,000 ₨20,710
5 in stock
CompareWeight | 0.5 kg |
---|---|
Dimensions | 15 × 10 × 7 cm |
Specifications | Range | UT501A | |
Insulation resistance (Ω) | Test voltages | 100V/250V/500V/1000V | 0%~10% |
100V | 0MΩ~100MΩ | ±(3%+5) | |
250V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
1000V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
Short-circuit current | <2mA | ||
AC voltage (V) | 30V~750V | ±(2%+3) | |
Features | |||
Display count | 2000 | ||
Auto range/Low battery indication | √ | ||
LCD backlight/Light alarm | √ | ||
Buzzer alarm/High voltage indication | √ | ||
Over load indication/Auto discharge | √ | ||
Test voltage secondary display | √ | ||
10MΩ internal resistance test | √ | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 70.6mm x 34mm | ||
Product color | Red and grey | ||
Product net weight | 500g | ||
Product size | 150mm x 100mm x 71mm | ||
Standard accessories | Batteries, test leads, alligator clips, gallus | ||
Standard individual packing | Gift box, carrying bag, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 500mm x 380mm x 330mm (0.063 CBM per standard carton) | ||
Standard carton gross weight | 17.7kg |
Based on 0 reviews
Be the first to review “UT501A Insulation Resistance Tester”
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
-
-
IR Thermo Meters
UNI-T UTi260E Professional Handheld IR Thermal Camera 256×192 pixels Wide Temperature -20ºC~550ºC with PC,WiFi,App Real Time Display
IR Thermo MetersUNI-T UTi260E Professional Handheld IR Thermal Camera 256×192 pixels Wide Temperature -20ºC~550ºC with PC,WiFi,App Real Time Display
UTi260B
Motor inspection:
Using UNI-T thermal imager can detect the imbalance loading, overloading, wiring error and parts malfunction etc. Heat insulation protection is the key action for avoid fire risk, engineer can also use the thermal imager check the protection situation regularly to ensure the safety production.PCBA inspection:
Using UNI-T thermal imager can quickly locate the components where temperature is abnormally higher.Electric inspection:
Using UNI-T thermal imager to check the device temperature can find the problems in time on switcher, contactor, transformer etc, which maybe caused by oxidation, corrosion, poor contact.SKU: n/a
There are no reviews yet.