-22%

UT50A Modern Digital Multimeters

Availability:

10 in stock


UT 50-II SERIES  digital multimeter  UT-50A with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

 

2,747 3,543

10 in stock

Compare

UT 50-II SERIES  digital multimeter  UT-50A with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

Category:
Weight 0.3 kg
Dimensions 16 × 8 × 4 cm
Specifications Range Best Accuracy
Model UT50A
DC Voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+1)
AC Voltage (V) 200mV/2V/20V/200V/750V ±(0.8%+3)
DC Current (A) 20mA/2mA/200mA/20A ±(0.8%+1)
AC Current (A) 200mA/2mA/200mA/20A ±(1%+3)
Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ ±(0.8%+1)
Capacitance (F) 2nF/20nF/2μF/100μF ±(4%+3)
Features
Full Icon Display
Diode
Continuity Buzzer
Low Battery Display
Input Impedance for DC Voltage Measurement 10MΩ
Data Hold
Display Backlight Auto
Max. Display 1999
Auto Power Off
General Characteristic 
Power 9V Battery (6F22)
LCD Size 95mm×25mm
Product Colour Red and Grey
Product Net Weight 275g
Product Size 165mm×80mm×38.3mm
Standard Accessories Test Lead, Battery,  Test Clip
.
Optional Accessories* Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2)

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT50A Modern Digital Multimeters”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • YIHUA 3010D DC Power supply

    0 out of 5
    (0)

    This model has compact design with all metal construction.

    1.This unit now features a Dual LED display with highly accurate LED digital readout.

    2.Maximum output is 30V at 10A.

    1. High stabilized output voltage.
    2. Short circuit protection.

    5.Over loading and current protection.

    SKU: n/a
  • CLAMP METER AC CM 2007

    0 out of 5
    (0)

    Specification of the item

    SKU: n/a
  • UTG1005A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)

    1. Intuitive interface design

    2. Single channel
    3. 125MS/s sampling rate, 14-bit vertical resolution
    4. Integrated analog and digital design
    5. 4.3 inches TFT LCD
    SKU: n/a
  • UNI-T UTG4162A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)
    bandwidth 160MHz
    Channels 2
    Sampling rate 500MS/s
    Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary
    Working modes Output on/off, continuous, modulation, sweep, burst
    Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM
    Frequency Characteristics
    Sine 1μHz~160MHz
    Square/Pulse 1μHz~50MHz
    Slope 1μHz~4MHz
    Harmonic 1μHz~80MHz
    Noise (-3dB) 160MHz bandwidth
    Resolution 1μHz
    Arbitrary Waveform
    Frequency range 1μHz~40MHz
    Length 8~32Mpts
    Vertical resolution 16 bits
    Min rise/fall time (typical: 1Vpp) <5ns
    General Characteristics
    Power 100V~240V ACrms, 50Hz/60Hz
    Display 8-inch TFT LCD, WVGA (800 x 480)
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm x 164mm x 108mm
    Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord
    Standard individual packing Carton box
    Standard quantity per carton 1pcs
    Standard carton measurement 405mm x 225mm x 265mmv
    SKU: n/a
  • ,

    JM-CT4-12 Electrician Wire Stripping Tool

    (1)

     

    Features:

    • Standard specs, form-ground, knife-type blades for accuracy, easy stripping without nicking insulation.
    • Built-in wire cutter and looping holes.
    • Convenient plier nose and sharp edge for pulling out the wire easily without damaging the wire cores.
    • Spring-loaded automatic opening
    • Sharp serrated edges in a plier style for wire pulls and loops.
    SKU: n/a