-7%

UT50B Modern Digital Multimeters

Availability:

20 in stock


UT 50-II SERIES  digital multimeter  UT-50B with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

3,300 3,543

20 in stock

Compare

UT 50-II SERIES  digital multimeter  UT-50B with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

Category:
Weight 0.3 kg
Dimensions 16 × 8 × 4 cm
Specifications Range Best Accuracy
Model UT50B
DC Voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+1)
AC Voltage (V) 200mV/2V/20V/200V/750V ±(0.8%+3)
DC Current (A) 20mA/2mA/200mA/20A ±(0.8%+1)
AC Current (A) 20mA/200mA/20A ±(1%+3)
Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ ±(0.8%+1)
Capacitance (F) 20nF/200nF/2μF/100μF ±(4%+3)
Temperature (°F) -40oF~1832oF ±(1%+4)
Temperature (°C) -40℃~1000℃ ±(1%+3)
Features
Full Icon Display
Diode
Continuity Buzzer
Low Battery Display
Input Impedance for DC Voltage Measurement 10MΩ
Data Hold
Display Backlight Auto
Max. Display 1999
Auto Power Off
General Characteristic 
Power 9V Battery (6F22)
LCD Size 95mm×25mm
Product Colour Red and Grey
Product Net Weight 275g
Product Size 165mm×80mm×38.3mm
Standard Accessories Test Lead, Battery, Point Contact Temperature Probe, Test Clip
Optional Accessories* Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2)
Related products

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT50B Modern Digital Multimeters”

There are no reviews yet.

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • UT58C General Digital Multimeter

    0 out of 5
    (0)

    1. 2000 display count, refresh rate 2~3 times/s

    2. Function symbols and test lead connection indication
    3. Transistor measurement
    4. Temperature measurement mode, with K-type temperature probe
    5. Frequency measurement
    6. Diode and continuity buzzer; auto power off; overload protection
    7. Data hold; 20A AC/DC current measurement
    SKU: n/a
  • UT 205A+

    0 out of 5
    (0)
    1. 1000A AC current measurement
    2. 1000V AC/DC voltage measurement
    3. 600A inrush current measurement (UT206A+)
    4. Temperature  (UT206A+)
    5. NCV (UT206A+)
    6. ACV frequency 10Hz~10kHz
    7. Jaw opening: 45mm
    8. Resistance / capacitance / frequency measurement
    9. Auto range / backlight / low battery indication
    10. Continuity / diode / duty cycle
    11. MAX/MIN
    12. Data hold / flashlight / relative mode
    13. Auto power off
    14. CAT II 1000V/CAT III 600V
    SKU: n/a
  • YH 907F IRON FOR 898BD+

    0 out of 5
    (0)
    • This 907F handle (5-pin) is ONLY for genuine YIHUA 939D+ soldering stations. (To avoid incompatibility issue, please correctly identify the model number & pin number from your machine. )
    • Note:this 907F soldering iron handle is not compatible with other stations except the genuine YIHUA 939D+ soldering station.
    • 1 Year (USA Exclusive) – Our team is providing professional assistance 24/7 right on Amazon.Welcome to drop us a message at Amazon’s Messaging System if you have any queries with this spare part. We will help confirm the compatibility and recommend you the safest match part.
    SKU: n/a
  • UTG9002C-II Function/Arbitrary Waveform Generator

    0 out of 5
    (0)

    1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary

    2. Output frequency range: Sine/square, 2MHz
    3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz
    4. EBTN LCD screen
    SKU: n/a