UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.
Multimeters
UT51 Standard Digital Multimeters
Availability:
10 in stock
UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.
₨5,700 ₨5,959
10 in stock
CompareWeight | 0.6 kg |
---|---|
Dimensions | 19 × 9 × 3 cm |
Specifications | Range | Best Accuracy |
Model | UT51 | |
DC Voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+1) |
AC Voltage (V) | 200mV/2V/20V/200V/750V | ±(0.8%+3) |
DC Current (A) | 20mA/200mA/2mA/20mA/200mA/2A/10A | ±(0.8%+1) |
AC Current (A) | 200mA/2mA/20mA/200mA/2A/10A | ±(1%+3) |
Resistance (Ω) | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ | ±(0.8%+1) |
Features | ||
Fused 10A Range | √ | |
Transistor | √ | |
Diode | √ | |
Continuity Buzzer | √ | |
Low Battery Display | √ | |
Input Impedance for DC Voltage Measurement | 10MΩ | √ |
Max. Display | 1999 | √ |
General Characteristic | ||
Power | 9V Battery (6F22) | |
LCD Size | 65mm×33mm | |
Product Colour | Red and Grey | |
Product Net Weight | 560g (including holster) | |
Product Size | 190mm×88mm×34mm | |
Standard Accessories | Test Lead, Batteryl, Holster | |
. | ||
Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) |
Based on 0 reviews
Be the first to review “UT51 Standard Digital Multimeters”
-
Temperature and Humidity Meter
UT714 Multifunction Temperature Process Calibrator
The UT714 is powerful temperature calibrator that sources and measures thermocouples, RTDs, voltage, and resistance. It can be used to test and calibrate diffrent types of temperature instruments. This device is suitable for testing input/output temperature terminals such as sensors and transmitters.
SKU: n/a -
Rework & Soldering Station
YIHUA 9936 Portable Soldering Station
Standard accessory
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
Clean sponge 1pc
Manual 1pc
Application Scope
- Production lines for electronic products ,
2. Repair industry for mobile phone.
3. SMD components requiring the highest precision
SKU: n/a - Production lines for electronic products ,
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a
There are no reviews yet.