UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.
Multimeters
UT55 Standard Digital Multimeters
Availability:
30 in stock
UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.
₨8,520 ₨8,700
30 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 19 × 9 × 3 cm |
Specifications | Range | Best Accuracy |
Model | UT55 | |
DC Voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+1) |
DC Current (A) | 2mA/20mA/200mA/20A | ±(0.8%+1) |
AC Voltage (V) | 2V/20V/200V/750V | ±(0.8%+3) |
AC Current (A) | 20mA/200mA/20A | ±(1%+3) |
Resistance (Ω) | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ | ±(0.8%+1) |
Capacitance (F) | 2nF/20nF/200nF/2μF/20μF | ±(4%+3) |
Frequency (Hz) | 2kHz/20kHz | ±(1.5%+5) |
20kHz | ±(1.5%+5) | |
Temperature (°C) | -20℃~1000℃ | ±(1%+3) |
Features | ||
Transistor | √ | |
Diode | √ | |
Continuity Buzzer | √ | |
Sleep Mode | √ | |
Low Battery Display | √ | |
Input Impedance for DC Voltage Measurement | 10MΩ | √ |
Max. Display | 1999 | √ |
General Characteristic | ||
Power | 9V Battery (6F22) | |
LCD Size | 65mm×33mm | |
Product Colour | Red and Grey | |
Product Net Weight | 580g (including holster)) | |
Product Size | 190mm×88mm×34mm | |
Standard Accessories | Test Lead, Battery, Holster,Point type temperature probe | |
. | ||
Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) |
Based on 0 reviews
Be the first to review “UT55 Standard Digital Multimeters”
-
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.