UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.
Multimeters
UT55 Standard Digital Multimeters
Availability:
30 in stock
UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.
₨8,520 ₨8,700
30 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 19 × 9 × 3 cm |
Specifications | Range | Best Accuracy |
Model | UT55 | |
DC Voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+1) |
DC Current (A) | 2mA/20mA/200mA/20A | ±(0.8%+1) |
AC Voltage (V) | 2V/20V/200V/750V | ±(0.8%+3) |
AC Current (A) | 20mA/200mA/20A | ±(1%+3) |
Resistance (Ω) | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ | ±(0.8%+1) |
Capacitance (F) | 2nF/20nF/200nF/2μF/20μF | ±(4%+3) |
Frequency (Hz) | 2kHz/20kHz | ±(1.5%+5) |
20kHz | ±(1.5%+5) | |
Temperature (°C) | -20℃~1000℃ | ±(1%+3) |
Features | ||
Transistor | √ | |
Diode | √ | |
Continuity Buzzer | √ | |
Sleep Mode | √ | |
Low Battery Display | √ | |
Input Impedance for DC Voltage Measurement | 10MΩ | √ |
Max. Display | 1999 | √ |
General Characteristic | ||
Power | 9V Battery (6F22) | |
LCD Size | 65mm×33mm | |
Product Colour | Red and Grey | |
Product Net Weight | 580g (including holster)) | |
Product Size | 190mm×88mm×34mm | |
Standard Accessories | Test Lead, Battery, Holster,Point type temperature probe | |
. | ||
Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) |
Based on 0 reviews
Be the first to review “UT55 Standard Digital Multimeters”
-
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
LCR Meter
MS8910 Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
There are no reviews yet.