UT622A Digital Inductance LCR Meter


Specifications UT622A UT622C UT622E
Certificates CE, RoHS
Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
Output impedance 100Ω
Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESR
Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
Auto LCR
Test terminals Three-terminal test jacks, five-terminal test sockets
Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
Ranging mode Auto/hold
Tolerance range 1%~20%
Testing circuit mode Series/parallel mode
Clearing correction Open/short circuit
Fuse of test ports 0.1A/250V
Communication interface Mini-USB
LED alarm for tolerance
(pass: green; fail: red)
Display range
Maximum reading 99999
Minimum resolution 0.0001
Maximum accuracy 0.001
L 0.00μH~99.999H
C 0.00pF~99.999mF
Z/R 0.0000Ω~9.9999MΩ
ESR 0.0000Ω~999.99Ω
D 0.0000~9.9999
Q 0.0000~99999
θ -179.9°~179.9°
DCR 0.01mΩ–20.000MΩ
Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
General Characteristics
Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
Display 2.8′ TFT LCD 320X240
Product net weight 420g
Product size 93mm x 192mm x 44mm
Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual

57,410

Compare

UT622A Digital Inductance LCR Meter

Precision LCR Meter – Up to 0.1% high accuracy measurements, the unit mainly measures inductance (L), capacitance (C), resistance (R) of components, also measures impedance (Z), dissipation factor (D), quality factor (Q), angle phase (θ), and ESR.
Accurate Measurement – Selectable 4 test frequencies of 100Hz, 120Hz, 1kHz, and 10kHz. Selectable 3 test levels of 0.1V, 0.3V, and 1V. Selectable tolerance of 1%, 5%, 10%, and 20%. Able to select parallel or series increasing accuracy of in-circuit testing. Auto-off in 5min, 15min(default), 30min, or 60min are selectable.
3 Measurement Speeds – Slow(2 times per second), medium(5 times per seconds) and fast(20 times per second).
Tolerance Comparison – Equipped with audible/visual alarm, and counter features for tolerance fail/pass test.
Data Logger – The average, maximum, minimum value can be recorded via data logging mode.
Zeroing – Open/short zeroing eliminates connection errors, deliver more accurate measurement each times.
USB to PC – Transfer data to the PC/Laptop through a USB port, and exports to image file(jpg.), Excel and PDF report is available.
Portable – High resolution LCD with 5 digit display, lightweight, portable, and battery operated.
Applied in the product development, incoming inspections, or production line testing.

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT622A Digital Inductance LCR Meter”

There are no reviews yet.

  • YIHUA 936 Soldering Station

    0 out of 5
    (0)

    Application Scope


    1. Production lines for electronic products , suitable for desoldering of small solder joints ,components.
      2. Repair industry for moblie phone.
      3. SMD components requiring the highest precision
    SKU: n/a
  • UT256A

    0 out of 5
    (0)

    UT256 series are high reliable, true RMS fork meters. Its unique design allows users to measure current by simply moving the wire ofinterest inside the opening of the ‘fork’ past the labeled mark. With no mechanical parts, this meter bares no risk from any type ofmechanical failure.

    SKU: n/a
  • The Sanwa CD800a is a basic, portable, 4000 count digital multimeter

    0 out of 5
    (0)
    • 4000 counts
    • 0.7% Best Accuracy
    • Sharp contrast LCD with character 17.5mm high is used
    • Solid & protective body cover that can also be used as a tilt stand
    • Frequency, capacitance, and duty cycle measurement function
    • Continuity test with buzzer

    Includes meter, instruction manual and test leads.

    SKU: n/a
  • JM-8127 53 In 1 Professional Screwdriver Set Tool Kit

    0 out of 5
    (0)

     

    Features:

    Common used for precision work in electronics, DIY models, jewelry, eye glasses and other home appliances.

    Special pentalobe screws for opening iPhone, iPad and MacBook.

    Non-slip: handle with PP & TPR material.

    Accessories:

    1PC 115mm Tweezer

    1PC H4*120mm Extension Bar

    1PC Multifunction extension bar

    SKU: n/a