Environment Meters
UT658B USB Tester
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power. Users can use these devices to monitor charging status of any USB powered device.
₨2,640 ₨2,700
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power.
Applications:
Users can use these devices to monitor charging status of any USB powered device.
Specifications | UT658B |
Input voltage range (V) | 3V~9V |
Voltage resolution | 0.01V |
Voltage monitoring accuracy | ±(1%+5) |
Current monitoring range (A) | 0A~3.5A |
Current monitoring accuracy | ±(1%±5) |
Current resolution | 0.01A |
Capacity | 0~39999mAH |
Capacity data storage | 10 sets |
Display | LCD |
Warning | √ |
Button | √ |
Cable length | 10cm |
Pollution level | 2 |
Working temperature | -10℃~40℃ |
Storage temperature | -10℃~50℃ |
Relative humidity | <75% |
General Characterisitics | |
Product color | White |
Product net weight | 30g |
Product size | 72mm x 29mm x 12mm |
Standard individual packing | Gift box |
Standard quantity per carton | 60pcs |
Standard carton measurement | 205mm x 170mm x 170mm |
Standard carton gross weight | 2.3kg |
Based on 0 reviews
Be the first to review “UT658B USB Tester”
-
Usb Tester
UT658C USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: 0000 -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.