UT658B USB Tester
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power. Users can use these devices to monitor charging status of any USB powered device.
₨2,640 ₨2,700
Specifications | UT658B |
Input voltage range (V) | 3V~9V |
Voltage resolution | 0.01V |
Voltage monitoring accuracy | ±(1%+5) |
Current monitoring range (A) | 0A~3.5A |
Current monitoring accuracy | ±(1%±5) |
Current resolution | 0.01A |
Capacity | 0~39999mAH |
Capacity data storage | 10 sets |
Display | LCD |
Warning | √ |
Button | √ |
Cable length | 10cm |
Pollution level | 2 |
Working temperature |  -10℃~40℃ |
Storage temperature |  -10℃~50℃ |
Relative humidity | <75% |
General Characterisitics | |
Product color | White |
Product net weight | 30g |
Product size | 72mm x 29mm x 12mm |
Standard individual packing | Gift box |
Standard quantity per carton | 60pcs |
Standard carton measurement | 205mm x 170mm x 170mm |
Standard carton gross weight | 2.3kg |
Based on 0 reviews
Be the first to review “UT658B USB Tester”
-
LCR Meter
UT612 LCR Meters
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
SKU: n/a -
Power Quality Analyzer
UT283A Single Phase Power Quality Analyzer
1. Trend/event capture
2. Harmonics/inrush current measurement3. File management through USB interface4. Flick measure (PST/PLT values)5. User friendly interface6. Multimeter functions7. Scope functions including waveform display8. 3.5 inches 64K color TFT LCD display9. THD (Total Harmonic Distortion) function10.Long-term monitoringSKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead:Â WAPRZ0X6DZBB
- red crocodile clip:Â WAKRORE20K02
- Krokodylek czarny:Â WAKROBL20K01
- cover M-2:Â WAFUTM2
- automatic or manual mode:
SKU: n/a -
There are no reviews yet.