UT682 wire tracker consists of a transmitter and a receiver, it is able to track ethernet/telephone/power cables without opening their insulation.
UT682 can troubleshoot ethernet cables and is a recommended tool for debugging communication cables and audio/video cables.
Applications:
It can used to test continuity and check polarity on telephone lines
Weight | 0.3 kg |
---|---|
Dimensions | 8 × 7 × 3 cm |
Specifications | Range | UT682D | |
Wire tracking features | Wire types | Telephone line\twisted- pair\electric wire |
|
Telephone lines tracking distance | ≥3000m | ||
Polarity indication for telelphone lines |
DCV function, range: ±(5V~52V) |
√ | |
Telephone lines and LAN cables distinction | Jacks distinction | √ | |
Transmitter output voltage | 8V DC with a new battery | ||
Transmitter power supply | 9V battery | √ | |
Receiver power supply | 9V battery | √ | |
Max receiver standby current | ~10mA | √ | |
Max receiver operating current | <40mA (AC, RMS) | √ | |
Transmitter input voltage protection |
60V DC | ||
Operating environment | Operating temperature: 0~40℃; Storage temperature: -10~50℃ Operating humidity: 20~75%RH; Storage humidity: 10~90%RH; Altitude: ≤2000m |
||
General Characterisitics | |||
Product color | Red and grey | ||
Product net weight | Transmitter-150g, Receiver-130g | ||
Product size | Transmitter-74mm x 68mm x 28mm, receiver-208mm x 47mm x 33mm | ||
Standard accessories | 9V battery x 2 | ||
Standard individual packing | English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 425mm x 265mm x 260mm | ||
Standard carton gross weight | 7.5kg |
Based on 0 reviews
Be the first to review “UT682D Wire Tracker”
-
Fork Meter
UT256A
UT256 series are high reliable, true RMS fork meters. Its unique design allows users to measure current by simply moving the wire ofinterest inside the opening of the ‘fork’ past the labeled mark. With no mechanical parts, this meter bares no risk from any type ofmechanical failure.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT216D 600A True RMS Digital Clamp Meter
1. True RMS
2. Auto range, 3 times/s sampling rate3. MAX/MIN/Relative modes4. K-type temperature probe5. Flashlight6. 400Hz measurement7. NCV, non-contact AC voltage testing8. VFC, low pass filter9. Zeroing function10. Inrush current11. Analog bar graphSKU: n/a
There are no reviews yet.