UT 683KIT Wire Tracer
| Description | |
| Certificates | CE, RoHS |
| Transmitter | |
| Port flashing | √ |
| Wire tracking | √ |
| Line alignment | √ |
| Open-short test | 10kΩ |
| Polarity test | √ |
| Operating time | ＞8 hours |
| Receiver | |
| Wire tracking | RJ11＞3000m; RJ45＞100m |
| NCV function | √ |
| Headset jack | 3.5mm |
| Low battery indication | √ |
| Operating time | ＞5 hours |
| GENERAL CHARACTERISTICS | |
| Power | 1050mAh rechargeable lithium battery |
| Product net weight | Transmitter: around 95g; Receiver: around 127g |
| Product size | Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm |
| Standard accessories | USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual |
| Standard individual packing | Gift box, carrying bag |
| Standard quantity per carton | 20pcs |
| Standard carton measurement | 480mm x 370mm x 325mm |
| Standard carton gross weight | About 10kg |
₨10,027 ₨10,655
The device is an intelligent wire tracker which consists of the transmitter and receiver, this kit is designed with strong anti-interference ability. The receiver can quickly and accurately locate the target cable. This kit can automatically identify open, short, polarity, and quickly distinguish cable failure.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 20 × 5 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 683KIT Wire Tracer”
-
Visual Fault Locator
UT 691-10 Visual Fault Locator
Specifications Model UT691-10 Laser output power ≥10mW Optical fiber length range 8~10km Wavelength of redight 650±10nm Optical fiber adapter 2.5mm FC general connector Battery type 3.7V 1050mAh polymer lithium battery Battery life ＞7h Battery status display The battery status will be shown by 4 blue LED (not in flashlight) Green indicator Indicates auto power off state which LED will flash white light for 3 times Laser mode Continuous mode/Pulse mode Charge voltage and current DC 5V, < 1A APO 15min auto power off (manual adjustable) Warning symbol √ Warning √ Key press test ＞5000 times Drop test 1m General Characteristics Power 1050mAh rechargeable battery Product color Red and grey Product net weight 62g Product size 130mm x 38mm x 27mm Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 285mm x 245mm x 155mm Standard carton gross weight About 2.8kg SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
LED Tester
UT 659D LED Tester
Specifications Range UT659D Certifications CE/RoHS Output voltage 24V √ 300V √ Output current 2mA √ 30mA √ Continuity Output voltage: 5V (DC) Measuring resistance: 0~99.9Ω Input range 85V to 265V @ 50/60Hz Backlight function constant on Safety protection High-impedance open circuit Operating temperature 0°C~40°C Storage temperature -10°C~50°C Relative humidity <80% RH Operating altitude ≤2000m Drop protection 1m Category ratings CAT II 300V General Characterisitics Power AC 85V~260V， 50Hz/60Hz Display 60mm x 35mm Product net weight 175g Product size 150mm x 56mm x 42mm Standard accessories Power cable, test leads, English manual Standard individual packing Gift box, blister Standard quantity per carton 20pcs Standard carton measurement 345mm x 335mm x 245mm Standard carton gross weight 7.7kg SKU: n/a -
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a
There are no reviews yet.