-
×
SOLDERING BIT PVC 60 WATT
- Vendor:
superworld
Subtotal: ₨160
-6%
Multimeters
UT71A Middle Size Intelligent Digital Multimeter
Availability:
10 in stock
₨33,000 ₨35,000
10 in stock
CompareUT71 series can quickly solve complex problems on electronics, factory automation, distributionand electronic engineering equipment. UT71 series can set upper and lower limits, a very useful feature for improving electronics mass production inspection and screening efficiency.
Applications:
Electronics, factory automation, distribution and electronic engineering equipment
| Weight | 0.4 kg |
|---|---|
| Dimensions | 20 × 9 × 4 cm |
| Specifications | Range | UT71A |
| DC voltage (V) | 1000V | ±(0.1%+8) |
| AC voltage (V) | 1000V | ±(0.8%+40) |
| DC current (A) | 10A | ±(0.2%+20) |
| AC current (A) | 10A | ±(1%+15) |
| Resistance (Ω) | 20MΩ | ±(0.5%+20) |
| Capacitance (F) | 20mF | ±(1.5%+20) |
| Frequency (Hz) | 20Hz~200MHz | ±(0.1%+15) |
| Display count | 20000 | |
| General Characteristics | ||
| Power | 9V battery (6F22) | |
| Display | 73mm x 50mm | |
| Product color | Red and grey | |
| Product net weight | 384g | |
| Product size | 200mm x 93mm x 40mm | |
| Standard accessories | Battery, test leads, alligator clip, test clips, USB interface cable, PC software CD, carrying bag | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT71A Middle Size Intelligent Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
-
Multimeters
UT195DS Professional Digital Multimeters
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. 5/s sampling rate
4. True RMS
5. ACV 750V 5kHz bandwidth
6. (AC+DC) or (AV+FREQ) , dual mode
7. Flashlight
8. Auto LCD backlight controlled by light sensor (can be turned off)
9. LoZ voltage test, for ghost voltage measurement
10. Motor phase sequence measurement with 2 probes
11. 20A current measurement (max 30 seconds)
12. 31 analogue bar
13. Low pass filter, 1kHz 3dB attenuation
SKU: n/a
Related products
-
Multimeters
UT61B Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
- 1、Large LCD screen；
- 2、High resolution analog pointer display；
- 3、Full range overload protection；
- 4、Data hold, REL, Peak value measurement；
- 5、Low battery indication, backlight, and sleep mode；
- 6、External interface supports RS-232C and USB cable.UT61Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.
SKU: n/a
There are no reviews yet.