UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeters
UT81C Scope Digital Multimeter
Availability:
9 in stock
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance
₨45,000 ₨46,000
9 in stock
CompareMultimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.
Weight | 0.5 kg |
---|---|
Dimensions | 20 × 10 × 5 cm |
Specifications | Range | UT81C |
DMM Specifications | ||
DC voltage (V) | 1000V | ±(0.8%+8) |
AC voltage (V) | 750V | ±(1%+15) |
DC current (A) | 10A | ±(1%+8) |
AC current (A) | 10A | ±(1.5%+8) |
Resistance (Ω) | 40MΩ | ±(1%+5) |
Capacitance (F) | 100μF | ±(3%+8) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Scope Specifications | ||
Bandwidth | 16MHz | |
Sampling rate | 80MS/s | |
Vertical accuracy | ±(5%+1) | |
Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ |
Time-base accuracy | ±(0.01%+1) | |
Time-base range | 50ns/div – 5s/div(1-2-5) | |
Features | ||
Display count | 4000 | |
Auto range | √ | |
Duty cycle | 0.1~99.9% | √ |
Diode | √ | |
Auto power off | √ | |
Continuity buzzer | √ | |
Display | 160 x 160 monochrome | √ |
Trigger types | Auto run/Normal/Single shot | √ |
Memory | 10 screens and setups | √ |
Contrast and brightness setup | √ | |
Low battery indication | √ | |
USB interface | √ | |
LCD backlight | √ | |
Input impedance for DCV | Around 10MΩ | √ |
General Characteristics | ||
Power | 1.5V battery (R6) x 4 | |
Display | 60mm x 60mm | |
Product color | Red and grey | |
Product net weight | 498g | |
Product size | 200mm x 100mm x 48mm | |
Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 12pcs | |
Standard carton measurement | 485mm x 450mm x 260mm (0.057CBM per standard carton) | |
Standard carton gross weight | 16.4kg | |
Optional accessories | Scope probe, AC power adaptor |
Based on 0 reviews
Be the first to review “UT81C Scope Digital Multimeter”
-
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
DC Power Supplies
YIHUA 3010D DC Power supply
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
- High stabilized output voltage.
- Short circuit protection.
5.Over loading and current protection.
SKU: n/a
There are no reviews yet.