-11%

Ut8805e Benchtop Digital Multimeter 5 1/2 Digits Digital Multimeter


Features
1. True 5½-digit reading resolution
2. Up to 5k rdgs/s sampling rate
3.Multiple mathematical operations
4. True-RMS,AC voltage range:750V,AC current range:10A
5. Built-in thermocouple cold junction compensation
6. Arbitrary sensor measurement
7. 1Gb flash memory storage which can support up to 10k data recall
8. With 4.3 inches TFT LCD. Pass/Fail
9. Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI language

170,400 190,400

Compare

Ut8805e Benchtop Digital Multimeter 5 1/2 Digits Digital Multimeter

UT8805E is an auto-ranging, true RMS desktop digital multimeter with 199999 counts, up to 5K rdgs/s, 300kHz frequency response, and a 4.3-inch TFT LCD. Pass/Fail, maximum value/minimum value/average value/relative value measurement, etc., 10K reading history data record, 1Gb Nand Flash total capacity. It is a superior electrical measuring instrument. It is suitable for measurement in electronics, communications, manufacturing, petroleum, national defense, electric power, chemical and other industries. It is an indispensable experimental tool for various colleges and universities.

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ut8805e Benchtop Digital Multimeter 5 1/2 Digits Digital Multimeter”

There are no reviews yet.

  • YH 9936 SOLDERING STATION

    0 out of 5
    (0)

    Features
    1. Portable; easy to carry and operate.
    2. PID control through a microcomputer. Fast temperature rising, only 15 seconds from 30 °C to 300 °C.
    3. LED display.

    SKU: n/a
  • UT501C Insulation Resistance Tester (Discontinued)

    0 out of 5
    (0)

    Features of UT501C Insulation Resistance Tester

    ● Auto power off

    ● Self-lock funciton

    ● Overrange indication

    ● Backlight function

    SKU: n/a
  • MRU-30 Earth Resistance and Resistivity Meter

    0 out of 5
    (0)

     

    • It allows to take the measurements of:

      • earthing resistance using auxiliary electrodes,
      • earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
      • earthing resistance using double clamps for measuring multiple earthing without underground connections.
      • ground resistivity (Wenner method),
      • continuity of equipotential bondings and protective
      • conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.

      Additionally:

      • measurement of resistance of auxiliary electrodes RS and RH,
      • measurement of interference voltage,
      • measurement in the presence of interference voltage in the power network
      • with frequency 50Hz, 60Hz,
      • selection of maximum measuring voltage (25V and 50V),
      • introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
      • memory of 990 measurements (10 banks of 99 cells each),
      • calibration of clamp used,
      • data transmission to the computer (USB),
      • indication of battery state.
    SKU: n/a
  • UT383-BT Mini Light Meter

    0 out of 5
    (0)
    SKU: n/a
  • A25D PM2.5 Meter

    0 out of 5
    (0)

    Main features

    1. Precise PM2.5 concentration based on pre-calibrated sensors

    2. Temperature measurement (℃/℉)

    3. Humidity measurement

    4. Emoticon display

    5. LCD backlight and red backlight alarm

    6. battery status, low power, auto power off

    SKU: n/a