UT890C+ TRMS Digital Multimeter
19 in stock
1.6000 Counts; Measure voltage and current RMS.
2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz
4.It has special functions: MAX/MIN and MAX-MIN
5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
6.It can measure diode whose voltage drop is up to 3V .So it is very suitable to measure LED.
7.It has functions: hold, power off and backlight.
8.It also measure temperature ℃ and ℉
₨4,600 ₨5,914
19 in stock
Compare1.6000 Counts; Measure voltage and current RMS.
2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz
4.It has special functions: MAX/MIN and MAX-MIN
5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
6.It can measure diode whose voltage drop is up to 3V .So it is very suitable to measure LED.
7.It has functions: hold, power off and backlight.
8.It also measure temperature ℃ and ℉
| Weight | 0.4 kg |
|---|---|
| Dimensions | 18 × 9 × 6 cm |
| Basic functions | Range | Basic accuracy | |||||
| Model | UNI-T | UT890C + | UT890D | ||||
| DC voltage V | 600.0mV | (0.5% + 4) | (0.5% + 4) | ||||
| 6.000V / 60.00V / 600.0V | (0.5% + 2) | (0.5% + 2) | |||||
| 1000V | (0.7% + 10) | (0.7% + 10) | |||||
| AC voltage V | 6.000V / 60.00V / 600.0V | (0.8% + 3) | (0.8% + 3) | ||||
| 750V | (1.0% + 10) | (1.0% + 10) | |||||
| AC current A | 6.000mA / 60.00mA | (1.0% + 12) | (1.0% + 12) | ||||
| 600.0mA | (2.0% + 3) | (2.0% + 3) | |||||
| 20.00A | (3.0% + 5) | (3.0% + 5) | |||||
| A direct current | 60.00A / 6.000mA / 60.00mA | (0.8% + 8) | (0.8% + 8) | ||||
| 600.0mA | (1.2% + 5) | (1.2% + 5) | |||||
| 20.00A | (2.0% + 5) | (2.0% + 5) | |||||
| Resistance | 600.0 | (0.8% + 5) | (0.8% + 5) | ||||
| 6.000k / 60.00k / 600.0k / 6.000M | (0.8% + 3) | (0.8% + 3) | |||||
| 60.00M | (1.0% + 25) | (1.0% + 25) | |||||
| Temperature ℃ | -400 ℃ ~ 1000 ℃ | (1.0% + 3) | |||||
| Temperature ℉ | -40 ℉ ~ 1832 ℉ | (1.5% + 5) | |||||
| Capacitance F | 6.000nF | (5.0% + 35) | (5.0% + 35) | ||||
| 60.00nF ~ 600.0F | (2.5% + 20) | (2.5% + 20) | |||||
| 6000F | (5.0% + 10) | (5.0% + 10) | |||||
| Frequency Hz | 9.999Hz ~ 9.999MHz | (0.1% + 5) | (0.1% + 5) | ||||
| Measuring range: 10Hz ~ 10MHz (auto range), 100kHz:100mVrms input amplitude 30Vrms, > 100kHz ~ 1MHz:200mVrms input amplitude 30Vrms, > 1MHz:600mVrms input amplitude 30Vrms |
|||||||
| Special features | |||||||
| Max / Min | |||||||
| True RMS measurement TRMS | |||||||
| Frequency response | Applicable sine wave and triangular wave, 200Hz other waveforms for reference |
40Hz ~ 1kHz | |||||
| Diode test | |||||||
| Continuity Buzzer | |||||||
| hFE | |||||||
| REL | |||||||
| Data Hold | |||||||
| LCD backlight | |||||||
| Battery voltage tips | |||||||
| Automatic shutdown | About 15 minutes | ||||||
| Input impedance | 10M | ||||||
| General Characteristics | |||||||
| Environment | 18 C ~ 28 C (64 F ~ 82 F); relative humidity: 75% | ||||||
| Battery | 9V battery (6F22)(Not included) | ||||||
| LCD size | 63mm × 29mm | ||||||
| Colors | Red + Grey | ||||||
| Body weight | 300g | ||||||
| Dimensions | 186mm × 91mm × 39mm | ||||||
| Standard accessories | Table pen, temperature probe (onlyUT890C +) | ||||||
Brand
UNI T
Based on 0 reviews
Be the first to review “UT890C+ TRMS Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
There are no reviews yet.