UT890C+ TRMS Digital Multimeter
19 in stock
1.6000 Counts; Measure voltage and current RMS.
2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz
4.It has special functions: MAX/MIN and MAX-MIN
5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
6.It can measure diode whose voltage drop is up to 3V .So it is very suitable to measure LED.
7.It has functions: hold, power off and backlight.
8.It also measure temperature ℃ and ℉
₨4,600 ₨5,914
19 in stock
Compare1.6000 Counts; Measure voltage and current RMS.
2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz
4.It has special functions: MAX/MIN and MAX-MIN
5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
6.It can measure diode whose voltage drop is up to 3V .So it is very suitable to measure LED.
7.It has functions: hold, power off and backlight.
8.It also measure temperature ℃ and ℉
| Weight | 0.4 kg |
|---|---|
| Dimensions | 18 × 9 × 6 cm |
| Basic functions | Range | Basic accuracy | |||||
| Model | UNI-T | UT890C + | UT890D | ||||
| DC voltage V | 600.0mV | (0.5% + 4) | (0.5% + 4) | ||||
| 6.000V / 60.00V / 600.0V | (0.5% + 2) | (0.5% + 2) | |||||
| 1000V | (0.7% + 10) | (0.7% + 10) | |||||
| AC voltage V | 6.000V / 60.00V / 600.0V | (0.8% + 3) | (0.8% + 3) | ||||
| 750V | (1.0% + 10) | (1.0% + 10) | |||||
| AC current A | 6.000mA / 60.00mA | (1.0% + 12) | (1.0% + 12) | ||||
| 600.0mA | (2.0% + 3) | (2.0% + 3) | |||||
| 20.00A | (3.0% + 5) | (3.0% + 5) | |||||
| A direct current | 60.00A / 6.000mA / 60.00mA | (0.8% + 8) | (0.8% + 8) | ||||
| 600.0mA | (1.2% + 5) | (1.2% + 5) | |||||
| 20.00A | (2.0% + 5) | (2.0% + 5) | |||||
| Resistance | 600.0 | (0.8% + 5) | (0.8% + 5) | ||||
| 6.000k / 60.00k / 600.0k / 6.000M | (0.8% + 3) | (0.8% + 3) | |||||
| 60.00M | (1.0% + 25) | (1.0% + 25) | |||||
| Temperature ℃ | -400 ℃ ~ 1000 ℃ | (1.0% + 3) | |||||
| Temperature ℉ | -40 ℉ ~ 1832 ℉ | (1.5% + 5) | |||||
| Capacitance F | 6.000nF | (5.0% + 35) | (5.0% + 35) | ||||
| 60.00nF ~ 600.0F | (2.5% + 20) | (2.5% + 20) | |||||
| 6000F | (5.0% + 10) | (5.0% + 10) | |||||
| Frequency Hz | 9.999Hz ~ 9.999MHz | (0.1% + 5) | (0.1% + 5) | ||||
| Measuring range: 10Hz ~ 10MHz (auto range), 100kHz:100mVrms input amplitude 30Vrms, > 100kHz ~ 1MHz:200mVrms input amplitude 30Vrms, > 1MHz:600mVrms input amplitude 30Vrms |
|||||||
| Special features | |||||||
| Max / Min | |||||||
| True RMS measurement TRMS | |||||||
| Frequency response | Applicable sine wave and triangular wave, 200Hz other waveforms for reference |
40Hz ~ 1kHz | |||||
| Diode test | |||||||
| Continuity Buzzer | |||||||
| hFE | |||||||
| REL | |||||||
| Data Hold | |||||||
| LCD backlight | |||||||
| Battery voltage tips | |||||||
| Automatic shutdown | About 15 minutes | ||||||
| Input impedance | 10M | ||||||
| General Characteristics | |||||||
| Environment | 18 C ~ 28 C (64 F ~ 82 F); relative humidity: 75% | ||||||
| Battery | 9V battery (6F22)(Not included) | ||||||
| LCD size | 63mm × 29mm | ||||||
| Colors | Red + Grey | ||||||
| Body weight | 300g | ||||||
| Dimensions | 186mm × 91mm × 39mm | ||||||
| Standard accessories | Table pen, temperature probe (onlyUT890C +) | ||||||
Brand
UNI T
Based on 0 reviews
Be the first to review “UT890C+ TRMS Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Oscilloscopes
UPO2104CS 4 Channels Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s；
2、Channels 4；
3、Bandwidth 100MHz，；
4、Memory Depth 28Mpts (Standard)；
5、Waveform Capture Rate up to 50,000wfms/s；
6、With 256 level intensity grading display；
7、Up to 65,000 frames for Waveform Record ,Replay；
8、Support serial bus trigger and decoding；
9、8 inches, TFT LCD，WVGA(800*480)；
10、Interface：USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.SKU: UP21O02CSMHZ -
Moisture Testers
MS6900S Moisture Tester
Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick
SKU: n/a
Related products
-
Multimeters
UT18B Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a -
Multimeters
UT132A Plam Size Digital Multimeters
UT132 Series is a 3.5 digit palm sized digital multimeter with stable performance, and fashionable design. UT132 are safe and reliable manual ranged multimeters that can be used for measuring AC/DC voltage, resistance, capacitance, temperature, diode voltage drop, transistor hFE parameter, circuit continuity, square wave output and so on. Its adapter plug socket can conveniently test surface mount devices. UT132 can be used for home, schools, factories, electrical and chemical engineering, and other areas. It is a great tool for circuit maintenance and electrical equipment repair.
SKU: n/a
There are no reviews yet.