UT89X/UT89XD is a reliable hand-held 35/6 bit digital multimeter with true RMS sine wave measurement. It can measure Max. 1000V DC/AC voltage, Max. 20A DC/AC current, resistance, capacitance, frequency, diode, hFE, continuity and NCV, quickly distinguishing between neutral and live wires accurately. UT89X can measure temperature and detect neutral and live wires with a test lead. UT89XD can perform LED test. Equipped with audible and visible alarm, flashlight and auto backlight functions, this series can be used in dark environment. It attracts users with its bi-color durable case, modern exterior and multiple functions.
Multimeters
UT89XD Digital Multimeter
1. 1000V AC/DC; 20A AC/DC
2. True RMS, 6000 count
3. Dual range NCV test which quickly identifies neutral and live wires
through light intensity
4. LED measurement
5. Audible/visual alarm
6. Capacitor charging indicator
7. Ergonomic design
8. Double injection molding
9. 1m drop proof
10. Flashlight; Auto backlight
₨7,000 ₨7,200
Weight | 0.4 kg |
---|---|
Dimensions | 19 × 9 × 5 cm |
Specifications | Range | UT89XD |
DC voltage (V) | 600mV/6V/60V/600V/1000V | ±(0.5%+2) |
AC voltage (V) | 6V/60V/600V/1000V | ±(0.8%+5) |
DC current (A) | 60μA/6mA/60mA/600mA/20A | ±(0.8%+8) |
AC current (A) | 60mA/600mA/20A | ±(1%+12) |
Resistance (Ω) | 600Ω/6kΩ/60kΩ/ 600kΩ/6MΩ/60MΩ |
±(0.8%+3) |
Capacitance (F) | 6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF/100mF | ±(2.5%+20) |
Frequency (Hz) | 9.999Hz/9.999MHz | ±(0.1%+4) |
Duty cycle | 0.1%~99.9% | ±(2%+5) |
Features | ||
Display count | 6000 | |
Sampling rate | 3 times/s | |
True RMS | √ | |
AC voltage frequency response | 45~1000Hz | |
AC current frequency response | 45~1000Hz | |
LED test | √ | |
Audible/visual alarm | V/A/Cap/Diode/hFE/NCV/Live (UT89X)/LED (UT89XD) | |
Diode/Continuity test | √ | |
Transistor hFE | √ | |
Dual range NCV test | √ | |
Auto power off | √ | |
Low battery indication | √ | |
Data hold | √ | |
Function selection | SELECT | √ |
Flashlight | √ | |
Auto backlight | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Display | 61mm x 36mm | |
Product color | Red and grey | |
Product net weight | 345g | |
Product size | 189mm x 89mm x 53mm | |
Standard accessories | Batteries, test lead, k-type temperature probe (UT89X) | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 40pcs | |
Standard carton measurement | 490mm x 450mm x 340mm | |
Standard carton gross weight | 23.5kg |
Based on 0 reviews
Be the first to review “UT89XD Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Resistense Tester
UT572 Advanced Earth Resistance Tester
UT572 is for measuring earth resistance and soil resistivity. It can automatically check interface connection and detect interference voltage/frequency, with data hold and indication functions. It can perform 2/3/4-wire measurements for different on-site applications, such as power equipment wiring and lightning protection equipment.SKU: n/a -
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a -
There are no reviews yet.