Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
Availability:
Out of stock
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)
₨0
Out of stock
CompareUTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Weight | 3.5 kg |
---|---|
Dimensions | 34 × 16 × 11 cm |
Specifications | |
Model | UTD2102CEX-II |
Bandwidth | 100MHz |
Channels | 2 |
Sampling rate | 1GS/s (single channel), 500MS/s (dual channels) |
Rise time | ≤3.5ns |
Memory depth | 25kpts |
Waveform capture rate | ≥20,000wfms/s |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Time base scale (s/div) | 2ns/div~50s/div |
Input impedance | (1MΩ±2%)//(22pF±3pF) |
Storage methods | Setup, wave, bitmap |
Trigger types | Edge, pulse width, slope, video, runt, window |
Waveform operations | A+B, A-B, A×B, A/B, FFT |
Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, standard deviation, number of measurements |
Frequency counter | 6 bits |
Interfaces | USB-OTG, Pass/Fail |
General Characteristics | |
Power | 100~240V ACrms, 50Hz/60Hz |
Display | 8-inch TFT LCD, WVGA (800 x 480) |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm x 164mm x 108mm |
Standard accessories | Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm x 420mm x 280mm |
Standard carton gross weight | 8kg |
Based on 0 reviews
Be the first to review “UTD2102CEX-II Digital Storage Oscilloscope”
-
Microscope
MECHANIC Industrial Triocular stereo microscope MC75T-B1
MECHANIC Industrial Triocular stereo microscope MC75T-B1
Binocluar magnification(7X-45X/2.1X-180X)
Eyepiece(WF10X/20MM,WF20X/10MM)
Objectlens(10.6X-5.5X),
Aux(0.3X/287,0.5X/165,0.7X/120,1.5X/45,2X/30)
Continuourszoom(0.7X-4.5X)
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
TITAN Clamp Multimeter TN88A in Pakistan
Specifications:
- TITAN TN88A Digital Clamp Meter 500V Insulation Tester
- DC voltage: 1000V ± (0.8% + 2)
- AC voltage: 750V ± (1.2% + 4)
- Alternating current: 200A / 1000A ± (2.5% + 5)
- Resistance: 200Ω / 20kΩ ± (1.0% + 2)
- Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
- High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
- The continuity of the alarm
- Low screen voltage
- Data retention
- Input impedance: 10MΩ
- Sampling rate: 3 times / s
- Maximum display: 1999
- Jaw opening: 50mm
SKU: n/a -
There are no reviews yet.