UTP1306 is a switch-type DC regulated power supply with single channel, which has OCP/OVP protection function, 3 groups of storage/recall preset values and output switch.
UTP1306 DC Power Supply
Specifications | ||
Model | UTP1306 | |
Output voltage | 0~32V | |
Output current | 0~6A | |
Output power | 192W | |
Load regulation | CV<0.1%+5mVCC<0.2%+3mA | |
Accuracy(25℃±5℃) | Voltage | <0.1%+5mV |
Current | <0.2%+3mA | |
Ripple and noise | ≤1mVrms | |
Output regulation resolution Reliability | CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs | |
Display mode | LED voltage and current dual display | |
Feature | Auto conversion of constant voltage and current with current limit protection | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC; 50Hz~60Hz | |
Product color | White and grey | |
Product net weight | 2.5kg | |
Product size | 80mm x 150mm x 230mm | |
Standard accessories | Power cord, output cables |
₨26,400 ₨28,980
Weight | 2.5 kg |
---|---|
Dimensions | 8 × 15 × 23 cm |
Based on 0 reviews
Be the first to review “UTP1306 DC Power Supply”
-
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a -
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10% Operating Environment 0~40℃ Relative humidity<80% Storage temperature -20~80℃ Relative humidity<80% Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a -
Multimeters
UT 39E+ Modern Digital Multimeter
Specifications Range UT39E+ Category ratings CAT II 1000V, CAT III 600V DC voltage (V) 200mV/2V/20V/200V/1000V ±(0.05%+3) AC voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+10) DC current (A) 2000uA/20mA/200mA/2A/20A ±(0.5%+5) AC current (A) 2000uA/20mA/200mA/2A/20A ±(0.8%+10) Resistance (Ω) 200Ω/2kΩ/20kΩ/2MΩ/20MΩ/200MΩ ±(0.3%+2) Capacitance (F) 2000uF ±(4%+20) Frequency (Hz) 10Hz~2MHz ±(0.1%+3) Temperature -40℃~1000℃ ±(1%+5) -40℉~1832℉ ±(1.5%+5) Conductance (nS) 0.1~100nS ±(1%+3) Display count 20000 NCV √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.5mm x 36mm Product net weight 330g Product size 175mm x 83mm x 53mm Standard accessories Test leads, temperature probe, English manual . SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Multimeters
UT 61E+ Digital Multimeter
Specifications Range UT61E+ Certifications (UT161 Series only) CE/RoHS/cETLus Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(0.8%+10) DC voltage (V) 1000V ±(0.05%+5) AC current (A) 20A ±(0.8%+10) DC current (A) 20A ±(0.5%+10) Resistance (Ω) 220MΩ ±(0.5%+10) Capacitance (F) 220mF ±(3%+5) Frequency (Hz) 220MHz ±(0.01%+5) Duty cycle (%) 0.1%~99.9% ±(2%+5) Display count 22000 Bandwidth (Hz) 40~10kHz LPF ACV √ ACV+DCV √ Transistor hFE √ Peak Hold √ Analog bar 46 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, temperature multi-purpose socket, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a -
Visual Fault Locator
UT 691-10 Visual Fault Locator
Specifications Model UT691-10 Laser output power ≥10mW Optical fiber length range 8~10km Wavelength of redight 650±10nm Optical fiber adapter 2.5mm FC general connector Battery type 3.7V 1050mAh polymer lithium battery Battery life >7h Battery status display The battery status will be shown by 4 blue LED (not in flashlight) Green indicator Indicates auto power off state which LED will flash white light for 3 times Laser mode Continuous mode/Pulse mode Charge voltage and current DC 5V, < 1A APO 15min auto power off (manual adjustable) Warning symbol √ Warning √ Key press test >5000 times Drop test 1m General Characteristics Power 1050mAh rechargeable battery Product color Red and grey Product net weight 62g Product size 130mm x 38mm x 27mm Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 285mm x 245mm x 155mm Standard carton gross weight About 2.8kg SKU: n/a
There are no reviews yet.