UT681C Cable Tester
20 in stock
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
₨3,074 ₨3,509
20 in stock
CompareMain Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
| Weight | 0.2 kg |
|---|---|
| Dimensions | 10 × 6 × 3 cm |
| tem | Function | Model | Description |
| UT681C | |||
| Test function | To test for: RJ45/RJ11/BNC | √ | Need to use RJ45 to BNC adaptor |
| Fast test mode | √ | LED1~LED8, LED_G | |
| Low test mode | √ | LED1~LED8, LED_G | |
| To test for the case of short circuit, crossover, open circuit, etc. | √ | ||
| Ethernet cable: shielded/unshielded test | √ | ||
| Manual shutdown function | √ | ||
| Auto shutdown function | √ | No operation within 10 minutes, the device will shut down automatically | |
| Single key operation | √ | ||
| Power supply: 9V battery | √ | ||
| Low voltage detection | √ | About less than 7.2V | |
| Application environment | Working temperature: 0~40℃ | √ | |
| Storage temperature: -10~50℃ | √ | ||
| Working humidity: 20~80% RH | √ | ||
| Storage humidity: 10~90% RH | √ | ||
| Altitude: ≤2000 meters | √ | ||
| Safety
standard |
CE EN61326-1: 2013;
EN61326-2-2: 2013 |
√ |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT681C Cable Tester”
-
Plier and Wire Strippers, Tools and Hardware
JM-CT4-12 Electrician Wire Stripping Tool
Features:
- Standard specs, form-ground, knife-type blades for accuracy, easy stripping without nicking insulation.
- Built-in wire cutter and looping holes.
- Convenient plier nose and sharp edge for pulling out the wire easily without damaging the wire cores.
- Spring-loaded automatic opening
- Sharp serrated edges in a plier style for wire pulls and loops.
SKU: n/a -
Oscilloscopes
Digital Storage Oscilloscope UTD2202CM
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
SKU: n/a -
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a
Related products
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a -
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a
There are no reviews yet.