UT681HDMI Cable Tester
20 in stock
1. Tests HDMI/MINI-HDMI cables
2. Fastline collocation type: A with A, A with C and C with C
3. Checks circuit breakage, short circuit, cross circuit and the missing wire
4. 20 visible LED indicators
5. Can toggle between scan and full display test modes
6. Single key operation
7. Manual/auto power off (after 10-minute inactivity)
8. Low battery indication
9. CE certification
10. Power supplied by 9V layer-built battery
₨5,100 ₨5,539
20 in stock
Compare1. Tests HDMI/MINI-HDMI cables
2. Fastline collocation type: A with A, A with C and C with C
3. Checks circuit breakage, short circuit, cross circuit and the missing wire
4. 20 visible LED indicators
5. Can toggle between scan and full display test modes
6. Single key operation
7. Manual/auto power off (after 10-minute inactivity)
8. Low battery indication
9. CE certification
10. Power supplied by 9V layer-built battery
| Weight | 0.2 kg |
|---|---|
| Dimensions | 10 × 6 × 3 cm |
| Item | Function | Model | Description |
| UT681HDMI | |||
| Test function | To test for:
HDMI/MINI-HDMI |
√ | |
| Scan test mode | √ | LED1~LED19, LED_S | |
| Full display test mode | √ | LED1~LED19, LED_S | |
| To test for the case of short circuit, crossover, open circuit, etc. | √ | ||
| Ethernet cable: shielded/ unshielded test | √ | ||
| Manual shutdown function | √ | ||
| Auto shutdown function | √ | No operation within 10 minutes, the device will shut down automatically | |
| Single key operation | √ | ||
| Power supply: 9V battery | √ | ||
| Low voltage detection | √ | About less than 7.2V | |
| Application environment | Working temperature: 0~40℃ | √ | |
| Storage temperature: -10~50℃ | √ | ||
| Working humidity : 20~80% RH | √ | ||
| Storage humidity : 10~90% RH | √ | ||
| Altitude: ≤2000 meters | √ | ||
| Safety standard | CE EN61326-1: 2013; EN61326-2-2: 2013 | √ |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT681HDMI Cable Tester”
-
Multimeters
UT81B Scope Digital Multimeter
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.SKU: n/a -
Soldering Station
YH 939D+ III EFFICIENT SOLDERING STATION
Manufacturer info:
1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current
machine (eg:temperature, iron sleep time,which is currently on display all function values can
be stored), you can quickly switch between each storage segment.
2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.
3.The use Hakko heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
4. Anti-static design, which can effectively avoid damage to delicate components;
5. It has automatically detects the failure and alarm function
6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.9.The panel is different from traditional,used aluminum alloy material,with new appearance design and improved performance .
10.The silvery knob give the users high-end and specialty sensor.
What’s in the box: main unit + power chord, manual, soldering iron with tip (900M-T type), holder with brass wool tip cleaner.
SKU: n/a -
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a -
DC Power Supplies
TITAN TN 305DS DC Power Supply
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable CurrentPower Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
SKU: n/a
Related products
-
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a -
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a
There are no reviews yet.