1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 27*14*22cm |
Weight | 1.9KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
Dissipation mode | Air cooling |
₨6,000 ₨7,013
1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Weight | 1.9 kg |
---|---|
Dimensions | 27 × 14 × 22 cm |
Specifications | LM50 |
Display type | EBTN |
Display size | 2.0-inches |
Range | 50m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
Specifications | Range | UT206B |
AC current (A) | 1000A | ±(2%+5) |
AC current frequency response | 50Hz~60Hz | |
Inrush current (A) | 1000A | ±(10%+10) |
AC voltage (V) | 6V | ±(1.2%+3) |
60V/600V/1000V | ±(1%+8) | |
DC voltage (V) | 600mV | ±(0.8%+3) |
6V/60V | ±(0.5%+5) | |
600V | ±(0.5%+5) | |
1000V | ±(0.5%+5) | |
Low pas filter (LPF ACV) | 600V/1000V | ±(2%+5) |
AC voltage frequency response | 40Hz~400Hz | |
LoZ ACV | 600V/1000V | ±(2%+5) |
Resistance (Ω) | 600Ω | ±(1%+3) |
6KΩ/60KΩ/600KΩ | ±(1%+2) | |
6MΩ/60MΩ | ±(2%+8) | |
Capacitance (F) | 60nF | ±(4%+25) |
600nF/6μF/60μF/600μF | ±(4%+5) | |
6mF/60mF | ±(10%+9) | |
Temperature (℃) | -40℃~300℃ | ±(1%+20) |
300℃~1000℃ | ±(1%+2) | |
Low voltage frequency (Hz) | 10Hz~1MHz | ±(0.1%+3) |
Duty cycle (%) | 10%~90% | ±(2.6%+7) |
Features | ||
Display count | 6000 | |
Jaw opening | 42mm | |
Current frequency | 50Hz~60Hz | |
High voltage frequency | 40Hz~400Hz | |
Analog bar | 31 | |
Auto power off | √ | |
Continuity test | √ | |
Auto/Manual range | √ | |
Low battery indication | √ | |
Diode test | √ | |
Relative mode/Data hold | √ | |
MAX/MIN | √ | |
Function selection | √ | |
Flashlight | √ | |
Wake-up function | √ | |
Auto power off current: <50μA | √ | |
Flexible current probe (optional) | Extends to 3000A | √ |
Input impedance (ACV/DCV) | ≥10MΩ | √ |
General Characteristics | ||
Power | 1.5V battery (R03) x 3 | |
Display | 43mm x 45mm | |
Product color | Red and grey | |
Product net weight | 465g | |
Product size | 272mm x 81mm x 43.5mm | |
Standard accessories | Test leads, batteries, point contact temperature probe | |
Standard individual packing | Gift box, carrying bag, English manual | |
Standard quantity per carton | 10pcs | |
Standard carton measurement | 355mm x 330mm x 315mm | |
Standard carton gross weight | About 7.1kg |
Power consumption | 720W |
Gun Temperature range | 100-480°C |
Gun heater material | Ferro-alloys |
Gun heater resistance | 74Ω |
Gun type | Brushless Fan |
air flow | 120L/min |
Soldering Iron Temperature range | 200-480°C |
soldering Iron Type | Blue Handle |
Soldering Iron Heater material | Imported high-power heater |
Soldering Iron heater power | 60W |
Gross weight | 3.3KG/pcs |
Inner box Dimension(cm) | 29*20*18 |
Outer box Dimension(cm) | 59.5*41*36 |
QTY | 8PCS PER outer carton |
MODEL | 939D+ |
RATED VOLTAGE | AC 220V±10% 50Hz |
OUTPUT POWER | 75W |
Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10% |
Withstand voltage and insulation tests | AC1500V 0.4A 60S |
Operating Environment | 0~40℃ relative humidity<80% |
Storage environment | -20~80℃ relative humidity<80% |
Body size | 14.5*12*8CM |
Weight | 2.17KG |
Work voltage | AC 26V±10% 50Hz |
Temperature range | 200℃~480℃ |
Temperature Stability | ±1℃(Static) |
Display Mode | LED Digital Display |
Calibration Mode | PID Digitally Programmed Calibration |
PID Temperature Calibration Cycle | 100MS |
Heating Core | Imported High-Powered Heating Core |
Tip-to-Ground Impedance | <2Ω |
Tip-to-Ground Voltage | <2mV |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
There are no reviews yet.