- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test <50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a -
Optical Multimeter
UT 693D Optical Multimeter (Power Meter & VFL)
Specifications Description UT693D Optical power meter Wavelength range 800nm~1700nm √ Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual faultlocator Wavelength 650nm±10nm √ Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Features Low battery indication √ Auto power off √ IP rating IP65 Drop test 2m General Characterisitics Power 1.5V battery (LR6) x 3 Display 63mm x 40mm Product color Red and grey Product net weight 300g Product size 189mm x 87mm x 45mm Standard accessories Batteries, carrying bag Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 295mm x 250mm x 210mm Standard carton gross weight 5.66kg SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-V Soldering Iron
1. Small size, light weight, easy to carry.
2. Usage of internal heating element for fast heating and high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron,
for safety and energy saving.
5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more
desirable and humanized.
6. Apply the SMT double-panel manufacturing technology with neat process and solid joints
7. The handle shell with a new environmentally friendly materials is safe and durable.
SKU: n/a
There are no reviews yet.