-
×
Wire-Stripper
- Vendor:
Subtotal: ₨2,004
-8%
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Clamp Meters
T 26A Digital Clamp Meter
- Multifunctional, can measure AC/DC voltage, AC current, resistance,capacitance,diode,temperature.
- Stable performance, high precision, respond quickly.
- Large LCD screen, easy to read.
- Low battery indication, overload protection.
- Data hold, buzzer indication.
- Max display size of 2000
SKU: n/a -
Rework & Soldering Station
YH 899D-II REWORK STATION
PARAMETERSPower consumption 720W Gun Temperature range 100-480°C Gun heater material Ferro-alloys Gun heater resistance 74Ω Gun type Brushless Fan air flow 120L/min Soldering Iron Temperature range 200-480°C soldering Iron Type Blue Handle Soldering Iron Heater material Imported high-power heater Soldering Iron heater power 60W Gross weight 3.3KG/pcs Inner box Dimension(cm) 29*20*18 Outer box Dimension(cm) 59.5*41*36 QTY 8PCS PER outer carton SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Rework & Soldering Station
YH 8508D+ Hot Air Rework Station
- 1.The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability. 4.Increase the wind the ball, can more clearly see the operation of the wind.
SKU: n/a
Related products
-
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a
There are no reviews yet.