YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Multimeters
UT 133A Digital Multimeter
Specifications Range UT133A DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%＋3) AC voltage (V) 600V ±(0.7%+3) DC current (A) 600uA/60mA/600mA/10A ±(1%+3) AC current (A) 10A ±(1.2%+3) Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2) Capacitance (F) 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF ±(4%+5) Frequency (Hz) 10.00Hz~1.000MHz ±(0.1%+5) Temperature (℃) ‒40℃~1000℃ ±(1%+4) Temperature (℉) ‒40℉~1832℉ ±(1.5%+5) Features Display count 6000 Range selection Auto Diode √ Continuity buzzer √ NCV √ LCD backlight √ Test probe holder √ Data hold √ Low battery indication √ Overload indication √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.8mm x 36.1mm Product color Red and grey Product net weight 255g (with batteries) Product size 155mm x 76.5mm x 49mm Standard accessories Manual, test leads, K-type thermocouple SKU: n/a -
Digital Earth Meter
UT 522 Digital Earth Tester
Specifications Range UT522 Earth resistance (Ω) 0~40Ω ±(2%+20) 0~400Ω ±(2%+3) 0~4000Ω ±(2%+3) AC earth voltage (V) 0~400V ±(1%+6) Frequency: 50Hz/60Hz √ Features Display count 4000 Manual range √ Auto power off Around 10 minutes √ Low battery indication √ Data hold √ Data storage 20 LCD backlight √ Full icon display √ Double insulation protection √ Poor contact display “…Ω” √ Over-range display Display “OL” √ Simple 2-wire testing √ Precise 3-wire testing √ General Characterisitics Power 1.5V battery (LR6) x 6 Display 70.6mm x 34mm Product color Red and grey Product net weight 560g Product size 160mm x 100mm x 70.5mm Standard accessories Batteries, simple test leads with alligator clips, standard test leads with alligator clips, earth spike, gallus Standard individual packing Gift box, carrying bag, English manual Standard quantity per carton 8pcs Standard carton measurement 530mm x 300mm x 350mm (0.056 CBM per standard carton) Standard carton gross weight 19kg SKU: n/a -
Infrared Thermometer
UT 305R Infrared Thermometer
Instantaneous measurementHigh measurement accuracy ±0.3ºCMeasurement range 32ºC ~ 43ºCContactless measurementSound notification and LED color change based on temperature measurementAdditional LightAutonomous battery systemPossibility of tripod mountingSKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a
Related products
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YIHUA 908D-II LED DIGITAL THERMOSTAT ELECTRONIC SOLDERING IRON
1.Portable anti-static thermostat soldering iron, using latest advanced temperature control circuit for precise temperature control.
2.Heating core uses high quality and durable materials, extending its service life.
3.The handle uses completely new environmentally friendly and heat resistant materials.
A high temperature spacer between the handle and the heating tube prevents heat
transfer and ensures comfortable use.4.LED digital display, allowing users to directly monitor the temperature and making
soldering work easier.5.It is equipped with a lock temperature switch. When it is opened to the lock temperature
state, the temperature is not adjustable; when the switch is turned to the unlocked state,
the temperature adjustment is resumed.6.The 908D is an upgraded version of the 908D, featuring the 908D, with digital temperature
correction, 0/510/30 minute sleep, and Fahrenheit/Celsius display conversion.SKU: n/a
There are no reviews yet.