YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Infrared Thermometer
UT 305R Infrared Thermometer
Instantaneous measurementHigh measurement accuracy ±0.3ºCMeasurement range 32ºC ~ 43ºCContactless measurementSound notification and LED color change based on temperature measurementAdditional LightAutonomous battery systemPossibility of tripod mountingSKU: n/a -
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Blower
Blower SE 555
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden etc.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible workSKU: n/a
Related products
-
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10％（max） 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ （static） ±2℃ （static） Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a -
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption 700W Gun temperature 100-480oC Gun type Brushless fan Air flow 120L/MIN Gun heater material Ferro-alloys Gun heater resistance 74Ω Soldering iron temperature range 200-480oC Soldering iron type Blue type Soldering iron cable Silicagel line Soldering iron heater material high-quality heater Soldering iron heater resistance 15Ω Inner box dimension(cm) 29*20*18 Outer box dimension(cm) 59.5*41*36 Outer carton box Q’TY 8PCS/CTN Prodcut weight 2.75KG/PC SKU: n/a -
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
There are no reviews yet.