YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Heat Gun
YH 850B HEAT GUN
Operating Voltage :AC 220V±10% 50Hz
Total Power:650W
Operating Environment 0～40℃
relative humidity ＜80％
Storage Temperature-20～80℃
relative humidity ＜80％
Dimensions :255*188*125mm
Weight:2.8KG
performance parameter 850B
Temperature Range :100℃～450℃
display mode —-
air supply mode :Brushless-Motor Fan
Airflow:120L/min(Max)
Temperature stability :±15℃ （static）
Heating Core: Ceramic Framed Heating Core
SKU: n/a -
Optical Multimeter
UT 693D Optical Multimeter (Power Meter & VFL)
Specifications Description UT693D Optical power meter Wavelength range 800nm~1700nm √ Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual faultlocator Wavelength 650nm±10nm √ Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Features Low battery indication √ Auto power off √ IP rating IP65 Drop test 2m General Characterisitics Power 1.5V battery (LR6) x 3 Display 63mm x 40mm Product color Red and grey Product net weight 300g Product size 189mm x 87mm x 45mm Standard accessories Batteries, carrying bag Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 295mm x 250mm x 210mm Standard carton gross weight 5.66kg SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-I Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a
Related products
-
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station, Touch Seperator
YH 946A-III Touch Seperator
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
There are no reviews yet.