-8%

YH 853D 2A Rework Station All IN 1

Add to Wishlist
Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection

₨20,400 ₨22,111

Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection
Category:
Weight 4 kg
Dimensions 25 × 19 × 14 cm

Technical data:

Rated voltage:  AC 220V±10% 50HZ ( 110V±10% 50HZ)

Whole machine  Power Consumption:  ≤800W

Work environment:  0-50°C

 

 

Iron parts

  

Gun parts

  

DC power supply partsA
 

work Voltage :AC:26V±10% 50HZ

  

work Voltage:  AC:220V±10% 50HZ\( 110V±10% 50HZ)

  

work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ)
 

Output power:50W±10%

  

Output power:600W±10%

  

Output power:15W/30W
 

Temperature range:200°C-480°C

  

Temperature range:100°C-480°C

  

Output voltage:0-15V
 

Temperature stability:±2°C

  

Temperature stability:±2°C

 Load stability:<0.01±2mv
 

Tip of ground impedance<2ohm

 Gun type:Diaphragm pump

Airflow is focus on it,24L~28L/Min

  

recovery time:<100us
Tip of ground voltage: <2mV Gun heater resistance:90Ω  

Ripple dB<1mvrms (virtual value)
Iron Heater material: Common heater  

Gun heater material:Nickel-alloys

  

Temperature coefficient:<300PPm/°C
Iron handle:Black handle  

Protection starting current:>standard value 10%

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 853D 2A Rework Station All IN 1”

There are no reviews yet.

  • YH 939D+ SOLDERING STATION

    YH 939D+ SOLDERING STATION

    0 out of 5
    (0)
    PARAMETROS
    MODEL 939D+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨8,764 ₨10,900
    Read more
    Add to Wishlist
    Compare

  • UT301C+ Infrared thermometer

    UT301C+ Infrared thermometer

    0 out of 5
    (0)

    1. 12:1 D:S ratio

    2. Adjustable emissivity 0.1~1.0
    3. ±1.5℃ temperature measurement accuracy
    4. User defined visual and audio alarm
    5. High contrast EBTN color display
    6. MAX/MIN/AVG/DIFF/Hold modes
    7. Dual lasers (UT301C+)
    8. Temperature recording up to 99 groups (UT301C+)
    9. Date/time display (UT301C+)
    10.Time scheduled measurement (UT301C+)
    SKU: n/a
    ₨13,800 ₨15,000
    Add to cart
    Add to Wishlist
    Compare
  • ,

    YH 947-V Soldering Iron

    ,

    YH 947-V Soldering Iron

    0 out of 5
    (0)

    1. Small size, light weight, easy to carry.

    2. Usage of internal heating element for fast heating and high efficiency.

    3. Temperature adjustable.

    4. With a power switch, turn off the switch when you are not using the iron,

    for safety and energy saving.

    5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more

    desirable and humanized.

    6. Apply the SMT double-panel manufacturing technology with neat process and solid joints

    7. The handle shell with a new environmentally friendly materials is safe and durable.

    SKU: n/a
    ₨3,000 ₨3,700
    Add to cart
    Add to Wishlist
    Compare
  • ,

    YH 928D-II Soldering Iron

    ,

    YH 928D-II Soldering Iron

    0 out of 5
    (0)

    1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.

    2. Application of high precision switching power supply technology, small size, light weight, easy to carry.

    3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.

    4. Application of unique design of high-precision LED display, showing clear and beautiful.

    5. Equipped with LED lights, in the case of lacking light, open the lights, so that soldering is more desirable and human.

    SKU: n/a
    ₨4,560 ₨6,355
    Add to cart
    Add to Wishlist
    Compare
  • ,

    YH 947-I Soldering Iron

    ,

    YH 947-I Soldering Iron

    0 out of 5
    (0)

    1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.

    2.Electric iron overall stability is much higher.

    3. Energy-efficient, while rapid heating, cutting temperature recovery performance.

    4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.

    5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.

    6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.

    7. Adopt a common device design, easy to replace devices

    SKU: n/a
    ₨1,450 ₨1,679
    Add to cart
    Add to Wishlist
    Compare

  • UT 207 CLAMP METER

    UT 207 CLAMP METER

    0 out of 5
    (0)

    1. 1000A AC/DC current measurement, 3 times/s sampling rate                                                                                       2. True RMS                                                                                                                                                                                 3. Inrush current                                                                                                                                                                         4. Zeroing function                                                                                                                                                                     5. Full icon display                                                                                                                                                                     6. MAX/MIN                                                                                                                                                                               7. Data hold; Duty cycle                                                                                                                                                             8. Auto power off and low battery indication                                                                                                                         9. Diode; Continuity buzzer; Input Impedance for DCV

    SKU: n/a
    ₨21,058 ₨23,691
    Add to cart
    Add to Wishlist
    Compare

Related products

  • YH 948D Soldering Iron

    YH 948D Soldering Iron

    0 out of 5
    (0)

    YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..

    Features Of YIHUA 948D 130W High-frequency Desoldering Station:

    • Adopts PID programmable temperature control technology
    • Equipped with a suction pen to help remove IC.
    • The anti-static design prevents electrostatic component damage or leakage.
    • Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
    • A portable built-in vacuum with strong suction does away with external vacuum systems.

     

    SKU: n/a
    ₨41,458 ₨46,067
    Read more
    Add to Wishlist
    Compare

  • YH 898BD+ REWORK STATION

    YH 898BD+ REWORK STATION

    0 out of 5
    (0)
    Machine parameter
    Rated voltage AC 220V±10%  50Hz
    Total Power 730W
    300℃ Constant Temperature Power

    (High-Speed PID Programmed to

    Energy Savings)

    		 250W±10％
    Operating Environment 0～40℃ Relative humidity＜80％
    Storage temperature －20～80℃  Relative humidity＜80％
    Dimensions 13.5*15*10cm
    weight 2.65KG
    SKU: n/a
    ₨13,680 ₨14,840
    Add to cart
    Add to Wishlist
    Compare

  • YIHUA 936 Soldering Station

    YIHUA 936 Soldering Station

    0 out of 5
    (0)

    Application Scope


    1. Production lines for electronic products , suitable for desoldering of small solder joints ,components.
      2. Repair industry for moblie phone.
      3. SMD components requiring the highest precision
    SKU: n/a
    ₨4,343 ₨5,265
    Read more
    Add to Wishlist
    Compare

  • YH 8508D Hot Air Rework Station

    YH 8508D Hot Air Rework Station

    0 out of 5
    (0)
    • 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
    • 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
    • 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
    • 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
    • 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
    • 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
    • 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
    SKU: n/a
    ₨10,800 ₨11,846
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447