-
×
UT381 illuminometers
- Vendor:
superworld
Subtotal: ₨26,400
-8%
Rework & Soldering Station
YH 898BD+ REWORK STATION
| Machine parameter | |
| Rated voltage | AC 220V±10% 50Hz |
| Total Power | 730W |
| 300℃ Constant Temperature Power
(High-Speed PID Programmed to Energy Savings) |
250W±10％ |
| Operating Environment | 0～40℃ Relative humidity＜80％ |
| Storage temperature | －20～80℃ Relative humidity＜80％ |
| Dimensions | 13.5*15*10cm |
| weight | 2.65KG |
₨13,680 ₨14,840
Adopting Samsung microprocessor-PID programming for high-speed 200ms real-time tracking of air gun outlet temperatures and soldering iron tip temperatures, with real-time calibration! Outlet temperatures are extremely stable. Soldering iron handle wire /air gun handle wire employs a high-temperature silicone wire(undamaged when 300o soldering tip contacts silicone wire for 30 seconds);The soldering iron handle employs an imported high-power heating element for fast temperature compensation, especially useful for large joint welding, welding repairs, and difficult desoldering work, in additional to general welding applications and soldering small-sized components.
| Weight | 2.6 kg |
|---|---|
| Dimensions | 13 × 15 × 10 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 898BD+ REWORK STATION”
-
-
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Clamp Meters
UT202A+ Digital Clamp Meter
Specifications Range UT202A+ AC current (A) 600A ±(2%+10) AC current frequency (Hz) 50Hz~100Hz ±(1%+5) AC voltage (V) 600V ±(0.8%+5) AC voltage frequency(Hz) 10Hz~10kHz ±(1%+5) DC voltage (A) 600V ±(0.5%+2) Resistance (Ω) 60MΩ ±(0.8%+2) Capacitance (F) 60mF ±(4%+5) Frequency (Hz) 10Hz~10MHz ±(0.1%+4) Features Display count 6000 Auto range √ Jaw opening 28mm True RMS √ NCV √ Live wire test √ Continuity test √ Diode √ MAX/MIN √ Relative mode √ Data hold √ Low battery indication √ Auto power off √ General Characterisitics Power 1.5V battery (R03) x 2 Display 37mm x 25mm Product color Red and grey Product net weight 248g Product size 215mm x 63mm x 36mm Standard individual packing Gift box, Carring bag, English manual Standard quantity per carton 40pcs Standard carton measurement 485mm x 295mm x 385mm Standard carton gross weight 17.3kg SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
Related products
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 938BD+ DUAL SMD STATION
MODEL 938BD+ Power consumption 135W Temperature Range 100°C~480°C/212°F~896°F Display type LCD Temperature stability ±2°C/3.6°F (static) Heater voltage AC 24V ±10% 50Hz Sleep Function 0-99 Minutes Temperature Compensation Programmable -50 °C to +50 °C Working Environment 0~40°C/32°F~104°F Storage Environment -20°C ~ 80°C/-4°F ~ 176°F Soldering Iron & Hot Tweezers Cord Material 100% Silicone (Virtually No Memory) SKU: n/a
There are no reviews yet.