YH 899D REWORK STATION
| Power consumption | 700W |
| Gun temperature | 100-480oC |
| Gun type | Brushless fan |
| Air flow | 120L/MIN |
| Gun heater material | Ferro-alloys |
| Gun heater resistance | 74Ω |
| Soldering iron temperature range | 200-480oC |
| Soldering iron type | Blue type |
| Soldering iron cable | Silicagel line |
| Soldering iron heater material | high-quality heater |
| Soldering iron heater resistance | 15Ω |
| Inner box dimension(cm) | 29*20*18 |
| Outer box dimension(cm) | 59.5*41*36 |
| Outer carton box Q’TY | 8PCS/CTN |
| Prodcut weight | 2.75KG/PC |
₨14,880 ₨19,476
A 45 watt output soldering iron with temp range of 200°C – 480°C.You can also program the soldering iron to go into a “Sleep Mode” after your desired minutes of non-use (2,5,10 or 20minutes). Hot air gun can also be switched to be used in either a “Manual or Automatic Mode” and the hot air gun also has an “Automatic Cool Off Feature” which means that the hot air gun will go into a “Cool Off Period”. After it has been placed into its holder and has cooled off to a temperature of 100 Degrees Centigrade, it will enter a Standby Mode and the air will keep flowing. When it has cooled down to 100 Degrees Centigrade, the air will stop flowing and then you will know it is safe to turn the unit off.
| Weight | 2.7 kg |
|---|---|
| Dimensions | 29 × 20 × 18 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 899D REWORK STATION”
-
DC Power Supplies
UTP 3305C DC POWER SUPPLY
Specifications Model UTP3305C Output voltage 0~30V (CH1/CH2) Output current 0~5A (CH1/CH2) Output power 315W Load regulation Voltage <0.01%+5mV Current <0.1%+10mA Line regulation Voltage <0.01%+3mV Current <0.1%+3mA Resolution Voltage 10mV Current 1mA Accuracy (25℃±5℃) Voltage <0.5%+20mV Current <0.5%+10mA Ripple (20Hz~20MHz) Voltage ≤2mVrms Current ≤3mArms Output temperature
coefficientVoltage ≤150ppm Current ≤150ppm Voltage rise delay ≤100ms (10% rated load) Parallel/Series load regulation ≤0.1%+0.1V CH3 output features Voltage 5V Current 3A Voltage accuracy ±50mV Load regulation ±50mV Interfaces USB Device, RS-232 General Characteristics Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz Display 4 windows, LED Product net weight 9.1kg Product size 260mm x 176mm x 317mm Standard accessories USB and RS-232 interface cables, output cables Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 440mm x 388mm x 295mm Standard carton gross weight 10kg SKU: n/a -
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Multimeters
UT61D+ Digital Multimeter
Specifications Range UT61D+ Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(1%＋3) DC voltage (V) 1000V ±(0.5%＋3) AC current (A) 20A ±(1.2%＋5) DC current (A) 20A ±(1%＋2) Resistance (Ω) 60MΩ ±(1%＋2) Capacitance (F) 60mF ±(3%＋5) Frequency (Hz) 10MHz ±(0.1%＋4) Duty cycle (%) 0.1%~99.9% ±(2%＋5) Temperature (℃/℉) -40℃~1000℃ ±(1%＋3) -40℉~1832℉ ±(1%＋6) Display count 6000 Bandwidth (Hz) 40Hz~1kHz LoZ ACV √ Peak Hold √ Analog bar 31 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, temperature probe, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a
Related products
-
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a
There are no reviews yet.