-
×
UTP 03 60MHZ PROBE
- Vendor:
Subtotal: ₨3,401
-4%
Soldering Irons
YH 929D-I SOLDERING IRON
Availability:
Out of stock
Model:929D-I
Voltage:220V-240V/AC,50HZ
Maximum power:135W
Rated power:16W
Temperature range:200-450℃
Temperature display：Nixie tube
Tip to ground resistance：<2Ω(3 pins plug power cord)
₨6,317 ₨6,581
Out of stock
Compare1.Heat up fast with high efficiency since this product use the internal heating element.
2.Plugable type heating element, easy to replace.
3.Adjustable and constant temperature
4.Solder Feed Iron which can operate for soldering by one-hand, convenient and efficient.
5.Easy to replace the solder tin wire.
6.With a power switch, which can be turned off when no in use, safe and energy efficient.
7.The internal use of SMT double-sided manufacturing process, the components installation processes are performed orderly to ensure clarity of electric signal flow.
| Weight | 1 kg |
|---|---|
| Dimensions | 15 × 10 × 10 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 929D-I SOLDERING IRON”
-
Visual Fault Locator
UT 691-10 Visual Fault Locator
Specifications Model UT691-10 Laser output power ≥10mW Optical fiber length range 8~10km Wavelength of redight 650±10nm Optical fiber adapter 2.5mm FC general connector Battery type 3.7V 1050mAh polymer lithium battery Battery life ＞7h Battery status display The battery status will be shown by 4 blue LED (not in flashlight) Green indicator Indicates auto power off state which LED will flash white light for 3 times Laser mode Continuous mode/Pulse mode Charge voltage and current DC 5V, < 1A APO 15min auto power off (manual adjustable) Warning symbol √ Warning √ Key press test ＞5000 times Drop test 1m General Characteristics Power 1050mAh rechargeable battery Product color Red and grey Product net weight 62g Product size 130mm x 38mm x 27mm Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 285mm x 245mm x 155mm Standard carton gross weight About 2.8kg SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Rework & Soldering Station
YH 992D A+ 3 IN 1 REWORK STATION
parameters Rated voltage AC 220V±10% 50Hz power 720W±10％（Max） 300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 250W±10％ Working environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Dimensions 255*188*125mm Weight 5.11KG Parts parameters Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 550W 75W Temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Diaphragm pump — Air Flow 28L/min(MAX) — Temperature Stability ±1℃ （Static） ±1℃ （Static） Display Mode LCD display LCD display Calibration Mode The PID digital program proofreading
The PID digital program proofreading
PID Temperature Calibration Cycle rapidly 20ms high-speed 100ms Heating Core Ceramic columned heating element. Imported heater Standard nozzles/tips (3mm,5mm,8mm,10mm,13mm) 5PCS nozzles
B Tip ground impedance — ＜2Ω Tip of ground voltage — ＜2mV SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 899D-II REWORK STATION
PARAMETERSPower consumption 720W Gun Temperature range 100-480°C Gun heater material Ferro-alloys Gun heater resistance 74Ω Gun type Brushless Fan air flow 120L/min Soldering Iron Temperature range 200-480°C soldering Iron Type Blue Handle Soldering Iron Heater material Imported high-power heater Soldering Iron heater power 60W Gross weight 3.3KG/pcs Inner box Dimension(cm) 29*20*18 Outer box Dimension(cm) 59.5*41*36 QTY 8PCS PER outer carton SKU: n/a
Related products
-
Soldering Irons, Tools and Hardware
YH 947-V Soldering Iron
1. Small size, light weight, easy to carry.
2. Usage of internal heating element for fast heating and high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron,
for safety and energy saving.
5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more
desirable and humanized.
6. Apply the SMT double-panel manufacturing technology with neat process and solid joints
7. The handle shell with a new environmentally friendly materials is safe and durable.
SKU: n/a
There are no reviews yet.