YH 929D-II SOLDERING IRON
Out of stock
Model：929D-II
Voltage：220V~240V/AC,50Hz
Maximum power：130W
Rated power：18W
Temperature range：90~480°C/194~896°F
₨7,632 ₨8,555
Out of stock
Compare1. Heat up quickly with high efficiency since this product use the internal heat type of heating element.
2. Plugable type heating element, easy to replace.
3. Adjustable and constant temperature
4. Solder Feed Iron which can operate for soldering by one-hand, convenient and efficient.
5. Simply to replace the solder tin wire.
6. With a power switch, which can be turned off when not in use, safe and energy efficient.
7. The internal use of SMT double-sided manufacturing process, the components installation processes are performed orderly to ensure clarity of electric signal flow.
8. Equipped with sleep function, Celsius/Fahrenheit mode conversion and temperature calibration.
| Weight | 1 kg |
|---|---|
| Dimensions | 15 × 10 × 10 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 929D-II SOLDERING IRON”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-I Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a -
Rework & Soldering Station
YH 950 HIGH FREQUENCY SOLDERING STATION
MODEL 950 RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 150W WORKING ENVIRONMENT 0～40℃ relative humidity＜80％ STORAGE ENVIRONMENT －20～80℃ relative humidity＜80％ BODY SIZE 20*12.6*9.8CM WEIGHT 4.6KG WORK VOLTAGE AC 26V±10% 50Hz TEMPERATURE RANGE Three-optional temperature control, respectively：①200-480℃，②100-450℃，③50-420℃ TEMPERATURE STABILITY ±1℃ （Static） DISPLAY TYPE LCD display PID TEMPERATURE CORRECTION CYCLE rapidly 20ms TIP OF GROUND VOLTAGE ＜2Ω TIP GROUND IMPEDANCE ＜2mV SKU: n/a
Related products
-
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
Soldering Irons
YH 928D-III Soldering Iron
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Red is for 110W, yellow is for 90W and blue is for 65W.
SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-V Soldering Iron
1. Small size, light weight, easy to carry.
2. Usage of internal heating element for fast heating and high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron,
for safety and energy saving.
5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more
desirable and humanized.
6. Apply the SMT double-panel manufacturing technology with neat process and solid joints
7. The handle shell with a new environmentally friendly materials is safe and durable.
SKU: n/a
There are no reviews yet.