YH 939D+ SOLDERING STATION
Out of stock
| MODEL | 939D+ |
| RATED VOLTAGE | AC 220V±10% 50Hz |
| OUTPUT POWER | 75W |
| Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10％ |
| Withstand voltage and insulation tests | AC1500V 0.4A 60S |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Body size | 14.5*12*8CM |
| Weight | 2.17KG |
| Work voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃（Static） |
| Display Mode | LED Digital Display |
| Calibration Mode | PID Digitally Programmed Calibration |
| PID Temperature Calibration Cycle | 100MS |
| Heating Core | Imported High-Powered Heating Core |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
₨8,764 ₨10,900
Out of stock
Compare1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current
machine (eg:temperature, iron sleep time,which is currently on display all function values can
be stored), you can quickly switch between each storage segment.
2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.
3.The use imported heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
4. Anti-static design, which can effectively avoid damage to delicate components;
5. It has automatically detects the failure and alarm function
6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.
d)-50 °C to +50 °C temperature compensation function.
9.The panel is different from traditional ,used aluminum alloy material, with new appearance design and improved performance .
10.The silvery knob give the users high-end and specialty sensor.
| Weight | 2.1 kg |
|---|---|
| Dimensions | 14 × 12 × 8 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 939D+ SOLDERING STATION”
-
Portable Gas Detector
UT 338A Formaldehyde Gas Detector
Features of UT 338A Formaldehyde Gas Detector
- This formaldehyde detector is an instrument for detecting the indoor concentration of formaldehyde.
- It also can measure the current temperature and humidity; the temperature can be displayed in Celsius(°C) or Fahrenheit(°C).
- With a quick response and high precision, it can effectively protect you and your family from the harm of formaldehyde.
- With a blue backlight, it is convenient to use at night.
- Long press the power button to turn on.
- Ideal for houses, offices or cars.
SKU: n/a -
DC Power Supplies
YH 1501T DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 25W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Tool Kits, Tools and Hardware
JM-Y03 PLUS 43 in 1 Dual Dynamics Precision Electric Screwdriver
- Ultra-long standby time dual dynamics precision screwdriver: Portable and multifunctional easy to handle repair problems.
- Pocket size lightweight, easy to carry: The battery can be removed and replaced at any time.
- Screwdriver with pen shape design exquisite and flexible.
- Upgraded chip greatly increases efficiency.
- Meet daily maintenance demands.
SKU: n/a -
-
Arbitary Waveform Generator
UTG2122B Function/Arbitrary Waveform Generator
Specifications UTG2122B Max frequency 120MHz Channels 2 Sampling rate 320MS/s Waveforms Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM Arbitrary Waveform Length 8pts~16Mpts Vertical resolution 16 bits (symbol included) Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~25MHz Pulse 1μHz~20MHz Ramp 1μHz~3MHz Harmonic 1μHz~30MHz Arbitrary 1μHz~15MHz Noise 60MHz (-3dB) Resolution 1μHz Accuracy ±0.5ppm 25℃ First year aging rate: 1ppm Temperature coefficient: ±0.5ppm/℃ Temperature Coeifficient ＜2ppm/℃ Interfaces USB Host, USB Device, 10MHz clock source input/output General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 4.3-inch TFT LCD, WVGA (480 x 272) Product color White and grey Product net weight 3.2kg Product size 265mm x 110mm x 320mm Standard accessories BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 380mm x 330mm x 320mm Standard carton gross weight 8.5kg SKU: n/a
Related products
-
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
There are no reviews yet.